Lexus of Edmonton

Interested in Advertising on 780Tuners?  Please contact us

Results 1 to 6 of 6

Thread: Any info/recommendations on hot water tanks?

  1. #1
    Join Date
    Nov 2005
    Posts
    1,811
    Thanks
    167
    Thanked 184 Times in 138 Posts

    Default Any info/recommendations on hot water tanks?

    Any tips for buying a new one?

    Mine on the acreage was right f*&ked when I bought the place, but I've been putting it off. It still works fine, but my hot water is rusty as all hell and I want to fix that

    https://www.homedepot.ca/en/home/p.r...000792348.html

    https://www.rona.ca/en/gas-water-heater-49295016

    I just want it to be cheap. Its running off of crappy well water. Would either of these suffice? Is there any reason not to go with Rheem or Best?

    Never been in this position before. I don't know much about hot water tanks. Just would love to finally be free of rusty water! (My cold water is crystal clear, not a well problem. Well, the "well" definitely needs a good shocking, but that's for the spring time).

  2. #2
    Join Date
    Sep 2008
    Location
    Hong Kong
    Posts
    1,716
    Thanks
    8
    Thanked 15 Times in 14 Posts

    Default

    I'd get the Rheem as it has the newer style ignition. I was replacing an older John Wood.

    Rheem, John Wood, Bradford White are the main water heaters I've seen. Not sure the quality on Whirlpool. I just replaced mine with a Rheem 9 year warranty from HD

    https://www.amresupply.com/part/M-I-...S-ENERGY-SAVER
    Last edited by DJ Rice; January 15th, 2018 at 11:51 PM.

  3. #3
    Join Date
    Apr 2015
    Posts
    422
    Thanks
    2
    Thanked 91 Times in 69 Posts

    Default

    Quote Originally Posted by HiTempguy View Post
    Any tips for buying a new one?

    Mine on the acreage was right f*&ked when I bought the place, but I've been putting it off. It still works fine, but my hot water is rusty as all hell and I want to fix that

    https://www.homedepot.ca/en/home/p.r...000792348.html

    https://www.rona.ca/en/gas-water-heater-49295016

    I just want it to be cheap. Its running off of crappy well water. Would either of these suffice? Is there any reason not to go with Rheem or Best?

    Never been in this position before. I don't know much about hot water tanks. Just would love to finally be free of rusty water! (My cold water is crystal clear, not a well problem. Well, the "well" definitely needs a good shocking, but that's for the spring time).
    Have you tried flushing the tank, to get some of the rust/sediment out?

  4. #4
    Join Date
    Nov 2005
    Posts
    1,811
    Thanks
    167
    Thanked 184 Times in 138 Posts

    Default

    Quote Originally Posted by krmitlovesbacon View Post
    Have you tried flushing the tank, to get some of the rust/sediment out?
    House has slab heat, tough to do in the winter time. Technically, I don't know if the system is "up to code" running both the tap water and underfloor off the same system... but the house was signed off on when built, and the county doesn't care, so I just am making it work as cheap as possible.

    The well wasn't maintained which led to some pretty nasty water circulating for a long time. Being that the tank is 10 years old, combined with the crazy amount of buildup in the toilet tank/on the tapsets, I'm certain it is right f*&ked. I'd rather spend the $500-$600 and install a new tank myself, vs spend $100 and all the other work.

    I do appreciate the suggestion, its just really difficult to dump the tank right now with the current setup. To do it without replacing the tank would be kind of a waste IMO.

    Quote Originally Posted by DJ Rice View Post
    I'd get the Rheem as it has the newer style ignition. I was replacing an older John Wood.

    Rheem, John Wood, Bradford White are the main water heaters I've seen. Not sure the quality on Whirlpool. I just replaced mine with a Rheem 9 year warranty from HD

    https://www.amresupply.com/part/M-I-...S-ENERGY-SAVER
    Thank you for the info sir!

  5. #5
    Join Date
    Apr 2011
    Posts
    4,745
    Thanks
    172
    Thanked 1,153 Times in 782 Posts

    Default

    Quote Originally Posted by HiTempguy View Post
    House has slab heat, tough to do in the winter time. Technically, I don't know if the system is "up to code" running both the tap water and underfloor off the same system... but the house was signed off on when built, and the county doesn't care, so I just am making it work as cheap as possible.

    The well wasn't maintained which led to some pretty nasty water circulating for a long time. Being that the tank is 10 years old, combined with the crazy amount of buildup in the toilet tank/on the tapsets, I'm certain it is right f*&ked. I'd rather spend the $500-$600 and install a new tank myself, vs spend $100 and all the other work.

    I do appreciate the suggestion, its just really difficult to dump the tank right now with the current setup. To do it without replacing the tank would be kind of a waste IMO.



    Thank you for the info sir!
    Isn't it right next to a floor drain, by code?
    There should be a tap at the bottom of the tank precisely for this that you can attach a garden hose to and lead it clean & direct to a floor drain.
    (Not arguing with your other logic, just sayin)...

  6. #6
    Join Date
    Nov 2005
    Posts
    1,811
    Thanks
    167
    Thanked 184 Times in 138 Posts

    Default

    No drain. House was built in 99 and again, its out in the county so I dont know about differences in building codes (never had a house either with slab).

    Im also on septic, would prefer to avoid dumping the whole tank into there along with all the flushing.

    Trust me, whole thing is a clusterfuck. I knew that when signing up for this haha. There is plumbing I can drain the tank into when I go to replace it, but Id rather just run a hose outside.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •