| Integra - Click HERE for Original Thread |
| thugn$ |
i dunno if this is a double post but DAMNNNNNNNNN
 |
|
|
| JDC™ |
| seen it before, it was pointed out that it was a photo-chop |
|
|
| HKSpowers |
| I was wishing it wasent photochopped :( |
|
|
| MightyMidget |
there is no way a V10 could fit in a car like that.....the weight distribution would be totally off front 80%, rear 20% LOL
S |
|
|
| energie |
| That would be crazy if it did fit. |
|
|
| VerbotenZ34 |
Hmmm,....that gives me an idea,......:)
Verboten |
|
|
| Mekanik22 |
| A V10 Viper engine in an integra? I don't think so.... An obvious way to tell (besides common sense) is the engine is mounted front to back (rear wheel drive) instead of side to side like a front wheel drive which an integra obviously is. It's impossible to fit a V10 in there alone, not including the tranny... |
|
|
| SRBURG13 |
| You can make rear wheel drive cars out of Front wheel drive cars. I know of an RSX that is going to be rwd... |
|
|
| ChromeDragon |
quote:
Originally posted by Mekanik22
A V10 Viper engine in an integra? I don't think so.... An obvious way to tell (besides common sense) is the engine is mounted front to back (rear wheel drive) instead of side to side like a front wheel drive which an integra obviously is. It's impossible to fit a V10 in there alone, not including the tranny...
I know of a shop in town that was contemplating taking a Civic of theirs faster down the 1/4 and they would do this by making it RWD before making more power. |
|
|
| 2003specv |
| You can do ANYTHING if you have the $. |
|
|
| Mekanik22 |
| Yeah, you could make a FWD into a RWD, but how the hell would you fit a V10 in the stock integra engine bay? You can't... There is no signs of body work to hold that engine.... I'm just sayin it's not real. Look at the Strut Tower, it's rough around the edges... |
|
|
| SRBURG13 |
| yeah, the stb looks like it is sunk into the top of the engine. Thats kinda what gives it away if you don't know that much about cars etc. |
|
|
| Nightstalker |
quote:
Originally posted by Mekanik22
A V10 Viper engine in an integra? I don't think so.... An obvious way to tell (besides common sense) is the engine is mounted front to back (rear wheel drive) instead of side to side like a front wheel drive which an integra obviously is. It's impossible to fit a V10 in there alone, not including the tranny...
You seem to know very little about what having the right amount of money can mean.. Have you seen a single show of monster garage.. I was joking around with a couple V8 buddies of mine back when I first bought my civic.. we measured it out and we could fit a small block chev. in there no problem. run the drive shaft down the exhaust tunnel.. your set.. |
|
|
| 2HIGH~PSI |
| fuk even if it is photochopped they did an unbelivable job:bthumbup: but that would be soooo fast |
|
|
| Don_the_dragon |
| Wow, somebody should seriously do that tho :P |
|
|
| Sol Man |
It's an old pic and yes it's photoshoped.
But still funny as hell. |
|
|
| k_mac501 |
| it probably could be done, when i was in winnipeg i saw a geo metro with a 454 in it, it runs 10's. but they was a hell of alot of modification done to it, it wouldnt fit as cleanly as the picture shows |
|
|
| SplineZ |
haha, I could imagine the drive shaft on that... it'd be like... 5" long....
btw, a SBC is ALOT smaller than a v10.. a better comparison would be a BBC.... even then add a obout 5" for 2 more cyl :D
I couldnt imagine putting that much torque in a small fwd unitbody car.. Jam on the gas and watch the front end of your car tear itself off.. SWEET!
James Z
quote:
Originally posted by k_mac501
it probably could be done, when i was in winnipeg i saw a geo metro with a 454 in it, it runs 10's. but they was a hell of alot of modification done to it, it wouldnt fit as cleanly as the picture shows
|
|
|
| 2003specv |
| I guess nobody here has seen the Kugels Komponents kit for a RWD small-block Focus. |
|
|
| Mekanik22 |
quote:
Originally posted by Nightstalker
You seem to know very little about what having the right amount of money can mean.. Have you seen a single show of monster garage.. I was joking around with a couple V8 buddies of mine back when I first bought my civic.. we measured it out and we could fit a small block chev. in there no problem. run the drive shaft down the exhaust tunnel.. your set..
I know what you mean. But my post a couple under that said that it's probably possible, but there was no body work done to the car to seat that size of engine. I'm sure it could be done with the right funds, but the engine bay doesn't look like it has major body work which I think would be obvious if they put that size of engine in there. |
|
|
| blk240sx |
| That would be prety cool |
|
|
| stealth |
| fuck i hate it when you guys take pics of my track car and post it on here. |
|
|
|
|
|
