| Some questions.. - Click HERE for Original Thread |
| SilverZ24 |
| Nice equipment, but now that you have an aftermarket deck I would connect the amp to the deck with RCA's if you haven't already. And if you have, the deck should be able to control the level of the pre-outs. |
|
|
| DC5PWR |
I did connect the rca from the deck to the amp... which is when i noticed the bass loss... I duno if I need to screw around with the crossover or not.. i'm stumped ..:(
oh and its not the subcontrol... |
|
|
| SilverZ24 |
Hmm... I have the same amp and similar Alpine deck and I haven't noticed a problem... Have you adjusted the gain on the amp? You didn't somehow re-wire the subs so they are in like 8 ohm mono or something did you? :dunno:
Good luck figuring it out. :) |
|
|
| Tropical Boy |
make sure that you have the rca's connected to the sup out for the deck..i knwl it soundskinda novice but seriously... little misateks can happen!...
other than that..... jsut follow the tuning recomendations in the owners manual.... i think u have to crank it up so that the overload light goes on .... then you can adjust the gain....
ne who.... that is all...
-trav |
|
|
|
|
|