| Acura Motors! - Click HERE for Original Thread |
| rallyteg |
| Where in Alberta or BC would you get some stock acura motors new or used?? My 90 GS is over 300K now and is burning oil so I want to replace it and do some simple things to add HP nothing for racing just a daily driver with some punch. |
|
|
| WeDgE |
| Rebuild it rather than buy a new motor. Unless you're going to build one engine and return one to OEM spec as a back up... :) |
|
|
| SketchifisT |
| well if u plan to change internals u can buy an engine from a wreck yard pretty cheap but ugotta change stuff on it |
|
|
| scooby_dooby |
| i'd just rebuild it with some pr3 pistons for a 10.8 CR, good opportunity to install pistons, that and an si tranny and you'll be as powerfull as a gsr |
|
|
| street_racer101 |
| my advice is go to west side acura or alberta honda and talk to some of the mechanics there about what to do, or where to go. they're usually pretty helpful. |
|
|
| h22civic |
| Hondatoy usually has a few 90-93 Integra motors with less than 100 k...cheap. |
|
|
|
|
|
