| help on machining engine! - Click HERE for Original Thread |
| jesse |
i have a 98 eclipe and i need to get the engine machines so that the pistons will fit in. The only problem is that since im porting i want it done right. I need a shop that will cut 100% strait lines and will have there math down to the milieter. also there gonna be assembling a bit of it.
Does anyone know of any shops that they have had there engine go there before and come out with strait holes no warped cylinders from to much heat while drilling? i want the best for my engine. |
|
|
| TrevorK |
| Campbell Automotive is a reputable engine builder. |
|
|
| 2003specv |
quote:
Originally posted by jesse
and will have there math down to the milieter.
LOL, thats not too precise. I think you mean thousandth of an inch.:bthumbup: |
|
|
| stealth |
quote:
Originally posted by jesse
i have a 98 eclipe and i need to get the engine machines so that the pistons will fit in. The only problem is that since im porting i want it done right. I need a shop that will cut 100% strait lines and will have there math down to the milieter. also there gonna be assembling a bit of it.
Does anyone know of any shops that they have had there engine go there before and come out with strait holes no warped cylinders from to much heat while drilling? i want the best for my engine.
YO whats up?
U were at Apex yesterday werent you? I was the guy who came in right before you left, and were talking to Adam.
Im sure Adam can do it. Or if you wanted try Pro Drag, they are good with DSMS, dont know if they port though. |
|
|
| h22civic |
| Try EC automotive on 118 ave. They do a lot of work for the dealers around town. |
|
|
| Trowa |
yeah, i second the EC, at least they are doing my engine.
Andriy |
|
|
| Praylewd powr |
I am with EC automotive on this!
Great work! |
|
|
| BlueTurboEGG |
| I'd have to vote for Xtreme Machine for this one to throw another good name into the hat :) |
|
|
| Cougar_boy |
quote:
Originally posted by Praylewd powr
I am with EC automotive on this!
Great work!
Whats EC's Phone #? I Cann't find it |
|
|
| KRAB |
| What kind of eclipse do you have? Bell Engines I believe is the only shop in Edmonton with a torque plate for 4G63 engines. |
|
|
| Keith303 |
im currently getting my engine rebuilt at alberta engine rebuilders. they do a very thorough job and have experience with dsms.
Prodrag/zippys would also be a good chocie too,
Pro-drag is to DSMs, is what EZ-motorsports isto hondas:p |
|
|
| KRAB |
| Pro Drag sends there engines to Bell to get all the machining done. Does Alberta engine have a torque plate for the 4G63? Also if you don't mind what are you getting done and how much is it costing you? You can PM me if you want. |
|
|
| Pro Drag |
quote:
Originally posted by KRAB
Pro Drag sends there engines to Bell to get all the machining done. Does Alberta engine have a torque plate for the 4G63? Also if you don't mind what are you getting done and how much is it costing you? You can PM me if you want.
We actually use a couple different machine shops, depending on the work that needs to be outsourced. |
|
|
| KRAB |
| So Blaine what shop would you recomend me to go to get my 2.4L block bored and rebuilt? |
|
|
| Keith303 |
| i just re read the initial post and just now realized how funny it is.... |
|
|
| Pro Drag |
quote:
Originally posted by KRAB
So Blaine what shop would you recomend me to go to get my 2.4L block bored and rebuilt?
Bring it to the professionals and we will take care of it for you.:bthumbup: |
|
|
|
|
|
