| rx7turboracer |
Oay here hows it goes. I picked up a 255lph walbro fuel pump and a rtek7 chipand a 2.5 cat and picking up a down pipe also. is there anything i am missing that i will need. The rtek7 chip has a FCD built into it but should i rewire the fuel pump straight from the battery with a kill switch. Any opinions would help.
Thanks Jason |
|
|
| REFLUX |
How about fuel injectors? 720cc secondaries seems to be a common upgrade.
You'll prbly want to replace the Fuel Pulsation Damper as well, either with a new OEM one or with a Rising Rate Fuel Pressure Regulator.
If you get a RRFPR it is safer to also attach on an aftermarket Pulsation Damper (but not many ppl do this), I believe Marren makes such a product & is very good quality.
Get a boost gauge too.
Mechanical, Electrical, Autometer, GReddy, whatever.
I'd highly recommend getting your wastegate ported but that will involve removing the turbo & taking it to a machine shop (weld on a larger wastegate flap while you're at it & port it as big as possible)
If you still have the stock airbox on + a cat you should be alright for preventing boost creep.
I'll give you a ring tomorrow to see when you'll be free ;) |
|
|
|
