| HeavyEarly87T |
Hey,
I have a little "art" project that I need some materials for.
Does anybody have a aluminium wing that they do not want. Can be any condition, so if you have a bashed up one stuck in the corner of your garage or something, I would like it. I really only need a bit of it.
Motorcycle exhaust pipe/muffler from a small (250cc) dirt or street bike, not to rusted please.
Also if anybody has some stickers they never used on their car, toolbox, model cars/trains, toilet. The more bizarre, the better it is.
As the header says I want this for free and will pick up.
Thanks,
Url |
|
|
| wjjeeper |
ohhhh noooo.....
I can see where this is going. |
|
|
| HeavyEarly87T |
Yep..I'm pimp'n my ride baby! :eek:
You might think I'm joking but no, I truly am insane. Ain't that right wjjeeper?
Please support art in your community and contribute to my cause.
:dunno: |
|
|
| GOT BOOST |
quote:
Originally posted by HeavyEarly87T
Yep..I'm pimp'n my ride baby! :eek:
You might think I'm joking but no, I truly am insane. Ain't that right wjjeeper?
Please support art in your community and contribute to my cause.
:dunno:
:lol: That is too funny!I think I have a few stickers in my garage. I think it is a Hose Techniques sticker. I will take a look when I am in the garage tonight. The Techniques sticker has been proven on the dyno to increase your HP output by 7.9 HP to the wheels. You should see my tool box. It is covered in these sitckers. That baby moves from one end of the garage to the other in under 3 seconds. I would bring it out but it is not street legal.
Mike Nikolai |
|
|
| SilverNeonRacer |
| I know I have JT EVO sticker.. a couple of them.. maybe a AEM sticker somewhere... |
|
|
| HeavyEarly87T |
Thats great guys!
SilverNeonRacer, if you want to PM a number I can find you at I will try to catch up with you this week sometime.
Got-Boost,
I have seen your tool box. A little wiring and pipes, then it would be off to the street legals at Bud!
Just as a sub note: This is not going on my Supra. Again it is an art project. It will be a statement of frivolous functionality! Non-pragmatic practicality! |
|
|
| SilverNeonRacer |
quote:
Originally posted by HeavyEarly87T
Thats great guys!
SilverNeonRacer, if you want to PM a number I can find you at I will try to catch up with you this week sometime.
Got-Boost,
I have seen your tool box. A little wiring and pipes, then it would be off to the street legals at Bud!
Just as a sub note: This is not going on my Supra. Again it is an art project. It will be a statement of frivolous functionality! Non-pragmatic practicality!
I live 100miles outta Edmonton.. how soon do you need it? |
|
|
| HeavyEarly87T |
100 Miles? I see that now...One day I'll check avitar info. Not a bad day trip if I had a day to drive it. I don't need any of this too soon. We have a couple of options:
1. Mail it? You said it was stickers? Won't cost to much to mail.
2. When is the next time you know you are comming to EDM?
3. I try to do a road trip up that way & stop by for coffee?
lemmy know |
|
|
| SilverNeonRacer |
| Going to a meet this weekend? I'll probably try to make the Sat meet as then I can do my oil change while I'm in the city. |
|
|
| HeavyEarly87T |
I pm'd you my phone #. Call me this weekend when you are in town. We'll hook up.
Any others have stuff to offer? The sooner I get "stuff", the sooner I can begin.
I have added more ideas:
I need gold metal flake spray paint, like the news paper boxes for the globe & mail or national post. I'll probably buy this as most will not have it "laying " around.
I will also try to find a 3~4" K&N look alike air filter and 2 feet of pipe that i will have to mandrel bend for a CAI system.
More later.
Thanks |
|
|
| dmak_el |
quote:
Originally posted by HeavyEarly87T
I pm'd you my phone #. Call me this weekend when you are in town. We'll hook up.
Any others have stuff to offer? The sooner I get "stuff", the sooner I can begin.
I have added more ideas:
I need gold metal flake spray paint, like the news paper boxes for the globe & mail or national post. I'll probably buy this as most will not have it "laying " around.
I will also try to find a 3~4" K&N look alike air filter and 2 feet of pipe that i will have to mandrel bend for a CAI system.
More later.
Thanks
i got a broken clutch, and a worn out clutch disk, if u want it. i always wanted to throw it away, but i was just too lazy.... |
|
|
| SilverNeonRacer |
I have some silver glitter spray paint.. dunno how much is left.
I have a AEM and JT license plate frames too...
I'll have to look around for what else i have. |
|
|
| HeavyEarly87T |
quote:
Originally posted by SilverNeonRacer
I have some silver glitter spray paint.. dunno how much is left.
I have a AEM and JT license plate frames too...
I'll have to look around for what else i have.
It sounds like I just need to come out there and scavenge your garage. ;)
Thanks for the stuff!
quote:
i got a broken clutch, and a worn out clutch disk, if u want it. i always wanted to throw it away, but i was just too lazy....
Yeah I'm all for it! PM me your # & address & I'll see how soon I can grab it. |
|
|
| SilverNeonRacer |
quote:
Originally posted by HeavyEarly87T
It sounds like I just need to come out there and scavenge your garage. ;)
Thanks for the stuff!
Yeah I'm all for it! PM me your # & address & I'll see how soon I can grab it.
I don't have a garage, some is on my kitchen table, some is in my foyer, some is in my basement, and some is in my father's garage.
I hae a 3" Ractive cone filter with Heat shield... but I'd kinda like to keep it.... dunno why.... |
|
|
| GOT BOOST |
quote:
Originally posted by HeavyEarly87T
Thats great guys!
Got-Boost,
I have seen your tool box. A little wiring and pipes, then it would be off to the street legals at Bud!
Just as a sub note: This is not going on my Supra. Again it is an art project. It will be a statement of frivolous functionality! Non-pragmatic practicality!
Earl,
They will not allow the tool box box at bud park. It is too fast, and I have a heck of a time stopping it with those tiny brakes and tires that it comes equiped with. :lol:
As for not going on your Supra......... Yeah, I am looking forward to seeing the new and cosmeticially de-enhancements that you have done with all the free stuff you are getting. :lol: J/K
I am looking forward to seeing the art project. I have the stickers. I will bring them to you on Saturday.
Mike Nikolai |
|
|
| Supra_devil |
| well i have a lot of parts, intake manifolds, brackets, i think a fuel rail, and my parents want it gone more than i do, lol. stop by some time and see what you want. i have a hood scoop that you can have and more, thats all i can remember. |
|
|
| Soulfly |
| I have stickers.. lol.. and can Maybe get you some steel if you need it.. or some Aluminum plate.. let me know!! :p |
|
|
| HeavyEarly87T |
Thanks alot guys!
Supra_devil: Bring what you can or want to for Saturday or Friday at the dyno. I am going to try to be there for 2pm. This is the kind of stuff I need to dig up.
Soulfly: I will be interested in some steel or aluminum, but right now I am just collecting stuff. As the project starts comming together I may need some when connecting all the parts.
Yes I will be posting pictures of this "art" when it is done. If there is enough interest I may sell it to highest bidder for a good cause. I have to get it done before I can think of such plans.
Url |
|
|
| SilverNeonRacer |
| Dammit I can't find my decals... I'll look again here in a bit.. I just gotta run somewhere.... |
|
|
| blk240sx |
| i have an alluminum wing however it has slight damage and i wont give it away...........ill sell it to you tho! pm if interested |
|
|
|
