| xSilv3Rx |
Hi,
Im looking to get a new exhaust for my '92 Integra. Im most likely interested in a full cat back. What are some good exhausts? How wide would you recommend the pipe be? Anyone know of some good places in Edmonton to buy and/or install? Also, if anyone has a general idea of the price I should be expecting for the exhaust and install that'd be great. :)
Thanks |
|
|
| notaturbotalon |
| Get it custom made, by someone who can weld, or buy it. Stay clear of Zippys. |
|
|
| crazyrx7 |
ALTA custom exhaust by Kings Collage on 50st. Ask for Chico he will hook you up. Just tell him that the guy with the orange rx7 sent you.
R.K. |
|
|
| GOT BOOST |
quote:
Originally posted by crazyrx7
ALTA custom exhaust by Kings Collage on 50st. Ask for Chico he will hook you up. Just tell him that the guy with the orange rx7 sent you.
R.K.
Agreed,
Chico installed my RT Downpipe, HKS Dragger. He has also installed the exhaust on a few of my rides. The man does great work. :bthumbup:
Mike Nikolai |
|
|
| xSilv3Rx |
| Thanks, I'll check that place out. Any idea on what I should expect for the price? Or is there a big difference depending on what I want done? |
|
|
| TurboMR2 |
Go Chico!! :)
I went in to have some new exhaust hangers put in since the location of the old ones was making the exhaust that I had put in touch my rear add-ons..
they had fixed it initially but on my way home the exhaust settled and ended up touching the rear-add ons again..
After my finding that I was having the same problem again I immediately drove back .. honestly not excepting to be taken back that same day since they we're pretty close to closing time.
When I arrived there was only 10 minutes left before they shut down for the day but Chico made it priority that I be taken care off instead of sending me home.. this time they were able to fix the exhaust indefinitely .
kinda sucks also if I had to come back since I live way in the northside..
:bthumbup:
for Chico and all the guys at Alta Custom |
|
|
| dc2696 |
| i go to action muffler on 118ave.,they've always gimme a good price, decent work too, i only get them to install the pieces though i don't buy any of their mufflers ect. |
|
|
| Neo-Blue99GASE |
| Apex, they built my exhaust. |
|
|
| BErettin |
| try a place like JB's for the system.. but there are some crappy places around edmonton that do a good job.. there is an economy muffler I think just down fort road off 137 ave... they did my muffler.. and it was a great job.. quick service.. all around good experiance |
|
|
| Nightstalker |
| I also say go to alta custom. Its the place to go. |
|
|
| Keith303 |
quote:
Stay clear of Zippys.
zippys quoted me an insane $600 for 3" catback w/no muffler, Aswell I wasnt impressed atall with the quality of the upper ic pipe they made for me. |
|
|
| Soulfly |
for $600 You could Go to Fulblown MotorSports .. and Get a FULL Stainless Steel Cat-back, With Built in Resinator..
Awesome Quality.. and Mirrior Like Finish.. also.. has Deep sound. :bthumbup: |
|
|
| BErettin |
| true that... full blown is awesome.. i think i'm getting my mini bike from there.. hahaha.. |
|
|
| SilverZ24 |
Clayton at ABC is really good IMO. I have been there a few times with no problems.
And I find it funny so many people like Alta Custom.... I went there one time to have a broken flex pipe fixed, and I was told $120. Seemed about right because I had paid 100 bucks a few years before at ABC. I go to pick up my car and when I went to pay for it I was told it was approx (don't remember exact dollar) $200. I was like wtf? I was told 120. Then I was told that was just the part and not the labor. Well I was pissed, but didn't want make too big of a deal about it so I paid and went to leave.
My car was outside and it was nice outside, but about an hour earlier it had poured rain and they had my car parked out front with the passenger window all the way down. I actually had about a 1" puddle on the passenger seat and almost everything was soaked. I was really pissed off and went back in and they said "don't worry, it will vacuum out." They asked me to pull the car in the shop and when I did, they showed me where their vacuum was and said I was "allowed to use it". I totally wasn't impressed and told them that is was probably going to have to be aired out for a few days and they said I was making a big deal over nothing.
A few days later it was mostly dry, but the interior of the car smelt like mold. It was so bad I couldn't stand to be in the car. Phoned them back to arrange to have them pay a detail shop to properly clean in the interior and long story short, after lots of time and my money, they did nothing. And I believe Chico was the guy too (if he was around a few years ago).
Either way, that is my long winded way of saying I would never go to Alta Custom Exhaust and I would never recommend that place to any one for any reason. :thumbsdow |
|
|
| xSilv3Rx |
| Where is Fullblown Motorsports located? |
|
|
| BErettin |
| uhm... they are a few blocks south of the yellowhead... and just off 156th street... if you need a for sure addy pm me |
|
|
| Soulfly |
Turn Right Off 156th OR 149th, Or 142nd..... Onto 118th ave..
An then Head up to .. 160th street..? and then You go down the Road about 1/8th of a mile.. Prolly less.. And BEFORE the Stop Sign.. you will see, To your Right, A "Mr.Tachograph" And Fulblown Is Upstairs In that Building... :bthumbup:
If your Still having trouble.. Call Josh At.. 953-5674 And he will give you directions..
But seriously.. Get a full Stainless They Look awesome and Prove some Braging status! :P Not To mention.. They'll NEVER Rust.. and NEVER need Replaceing! :bthumbup: :bthumbup: :bthumbup: |
|
|
| wildmx3 |
| go to fulblown i went all custom with a 2.5" striaght pipe from the heads to my borla muffler from fulblown and out with the magna flow tips action muffler installed it all and supplied the pipe and it sounds amazing |
|
|
|
