| surface rust - Click HERE for Original Thread |
| Seks |
| Minute surface rust...what can I do to remove it? |
|
|
| n0c7 |
| Try CLR if its very minor, there are other chemicals that are rust converters, or sand it off. |
|
|
| Seks |
 |
|
|
| Seks |
| It seems like a chunk of the foam got sliced out, exposing the metal to the elements??? |
|
|
| TrevorK |
Sand/grind it off completely.
Coat it with POR15 or Rust Bullet. |
|
|
| Seks |
| What grit of sandpaper should I use? |
|
|
| TrevorK |
quote:
Originally posted by Seks
What grit of sandpaper should I use?
I'd use really rough paper (40, 60 or 100) because:
- You want to get it all off
- You'll be covering it with POR 15/Rust Bullet after so any scratches will be covered.
Make sure you get it down to bare metal - that's the key. |
|
|
| Seks |
quote:
Originally posted by TrevorK
I'd use really rough paper (40, 60 or 100) because:
- You want to get it all off
- You'll be covering it with POR 15/Rust Bullet after so any scratches will be covered.
Make sure you get it down to bare metal - that's the key.
That POR 15/Rust Bullet stuff is available at can tire? |
|
|
|
|
