| Parman |
| I have a AWD talon and it's making some noises from the rear. Thinking its coming from the diff. Can anyone recomend a good shop in edm? |
|
|
| Talontsi96 |
Zippy's Auto (West End)
Resource Auto (West End) |
|
|
| notaturbotalon |
| Any educated DSM owner would be a better bet than Zippys. |
|
|
| Pro Drag |
quote:
Originally posted by notaturbotalon
Any educated DSM owner would be a better bet than Zippys.
The problem is, there aren't many around. There are lots that think they are. |
|
|
| DSM |
quote:
Originally posted by Pro Drag
The problem is, there aren't many around. There are lots that think they are.
This is very true. Are there any around? |
|
|
| Pro Drag |
quote:
Originally posted by DSM
This is very true. Are there any around?
Yes. |
|
|
| Talontsi96 |
| Hey I've been working/tuning DSM's since 1996. I'd say that I have a half ass clue what I'm talking about. Zippy's and Resource are still my picks although I do 99% of all the work myself, I'd say both of those shops did a good job on some of the work I got them to do. |
|
|
| DSM |
quote:
Originally posted by Pro Drag
Yes.
Who would these shops be? I don't know of one "good" dsm shop in Edmonton. |
|
|
| Cody D |
I think Andrew and Rob at Zippy's are very good with DSM's, they did my engine swap and I haven't had one related problem since, they did my clutch, not a problem since, and they made me some nice intercooler piping.
I've been working on DSM's since 98 (not that that means anything) and I'd recommend them. |
|
|
| DSM |
quote:
Originally posted by Cody D
I think Andrew and Rob at Zippy's are very good with DSM's, they did my engine swap and I haven't had one related problem since, they did my clutch, not a problem since, and they made me some nice intercooler piping.
I've been working on DSM's since 98 (not that that means anything) and I'd recommend them.
Well I have had first hand experiences and know of a lot of people that say the exact opposite of Zippy's work. |
|
|
| Keith303 |
quote:
and they made me some nice intercooler piping.
Well I wonder who the fuck made my ic pipe then.. |
|
|
| Pro Drag |
quote:
Originally posted by DSM
Who would these shops be? I don't know of one "good" dsm shop in Edmonton.
There is at least one, but you don't seem to like their opinion on some cars. |
|
|
| Pro Drag |
quote:
Originally posted by DSM
Well I have had first hand experiences and know of a lot of people that say the exact opposite of Zippy's work.
Who are these "alot of people" ? |
|
|
| red88.n/a.rx |
| fuck why dont you just to canadian tire then if you think everywhere else is so shity. |
|
|
| DSM |
quote:
Originally posted by Pro Drag
Who are these "alot of people" ?
I could make a list but I don't feel like it and I don't want to put down someones name without them knowing. |
|
|
| DSM |
quote:
Originally posted by red88.n/a.rx
fuck why dont you just to canadian tire then if you think everywhere else is so shity.
Or you learn to do all the work on your car yourself so you don't have to deal with high shop prices and retards that don't have a clue what they are doing. |
|
|
| 95EagleAWD |
Apex on the Southside does the work on mine. It's a haul from St. Albert, but Travis and Karl and the guys are a good bunch. They had a sexy white Eclipse in there the first day I went to see if they'd do my exhaust, and it's gone there for that, my FMIC, clutch and flywheel and will be going there for my turbo/manifold/O2 housing. :D
Give 'em a call... |
|
|
| DSM |
| I don't understand, why can't you install the turbo, mani, and O2 housing? They aren't that hard to do. |
|
|
| 95EagleAWD |
| Lack of room and tools, really.... |
|
|
|
