| DelSoln |
| Just wondering what places would you guys recommend going to? |
|
|
| Inzane |
Try:
Aero Car Parts
7304-50 Street
Ph: 440-6017
Fax: 463-6017
Their paint & body guy Sheldon has done some paintless dent repair on one of my cars when he used to work at Tristar, doing work for Ericksen Nissan. I was quite happy. |
|
|
| testingcheck |
Auto Details does this also.
11505-105 AVE
(780)944-1444 |
|
|
| REFLUX |
I know there's a guy on here that does dent removal.
Mr.Dent
He's Saleen88503858295827901848 on the forum. |
|
|
| DelSoln |
| ^Where does he work? |
|
|
| DelSoln |
| Thanks Chris. I'll check them out. :) |
|
|
| Insomniac |
| btw, that's the Saleen 08495511678163 guy's buisness. I have no idea if he's any good, just giving you his contact info. |
|
|
| GOT BOOST |
quote:
Originally posted by DelSoln
Just wondering what places would you guys recommend going to?
Hi DelSoln,
Go to Canadian Tire and buy this product called "Ding King" Yes, I have exhausted every joke possible with the name! :lol: This is a paintless dent removal tool. Rather than explaning in great detail about this product please check out the url http://www.productchat.com/wheretobuy/ding_king.html
Also check out http://www.dingking.com/
My buddy and I had used this on his fiancee's Cavalier. A pole in the McDonalds drive through had jumped out and hit her in the rear quarter. After using the dingking on her car, the dent was smooth and non existant. The dent was approx the size of a large grapefruit. I reccomend this product as it is cheap and effective. The nice thing is if you use it and are not satisfied, return it to Canadian Tire! :D
Hope this helps,
Mike Nikolai |
|
|
| DelSoln |
| Thanks for the advice Got Boost but I have heard some pretty crappy reviews of the product through beyond. Either way I think I will check out Ming. Hopefully I don't get a crazy quote since the dings are not too bad. |
|
|
| GOT BOOST |
quote:
Originally posted by DelSoln
Thanks for the advice Got Boost but I have heard some pretty crappy reviews of the product through beyond. Either way I think I will check out Ming. Hopefully I don't get a crazy quote since the dings are not too bad.
Hi DelSoln,
No worries. I am basing my opinion on the size and location of the dent. Granted I had only used it once. I was not expecting much from it to be honest. For me it sure made a good impression with no negative side effects. The next time I use it and I am not satisfied with it, I will post the results.
Best of luck with the dings. :D
Mike Nikolai |
|
|
| hAxOr |
| i got a king ding kit wow did i make mess with that slide hammer was too rough with it. My frend s not bad with it tho om my 5th escort he got some out pretty good but it looked tricky ti do. |
|
|
| Saleen880549 |
quote:
Originally posted by Insomniac
btw, that's the Saleen 08495511678163 guy's buisness. I have no idea if he's any good, just giving you his contact info.
quote:
Originally posted by REFLUX
I know there's a guy on here that does dent removal.
Mr.Dent
He's Saleen88503858295827901848 on the forum.
Wholly sh!t ...... I have enough numbers to keep track of...... :)
Any good........ well, I am a super fussy car guy........ and I have been doing PDR in this city for almost 14 years......... I work to get stuff 100% and been told I am the best in the city ( and NOT by my Mother. ha ha ) .....
I try not to get a big head over it....... I just want to get dents out that you can't see anything. just a one person operation....... and those can be the best..... as good or great service can be hard to find.
I would post my phone number..... but moderators could say I am out of line..... a link above links to my web site..... that Imsomniac posted..... thanks.... Imsomniac.....
Brian |
|
|
| Saleen880549 |
quote:
Originally posted by testingcheck
Auto Details does this also.
11505-105 AVE
(780)944-1444
I don't think these guys do it..... they sublet it. They called me recently to see if I would come by to fix dents on site ... they were looking for someone to to their PDR I guess.......... and I said I only work out of my south side location........
Brian
|
|
|
| DelSoln |
| ^Auto Details does sublet their work. That is why they give out ridiculously over inflated quotes for work. Do not go there. |
|
|
| Saleen880549 |
quote:
Originally posted by DelSoln
^Auto Details does sublet their work. That is why they give out ridiculously over inflated quotes for work. Do not go there.
My pricing is very good.. as I am a one person operation with low overhead .... I dropped my price $25 for a young guy yesterday with a Civic with a few dents as it took less time then I pictured for some tough dents. He was happy with the work done and even happier when I told him it was cheaper.....
I keep so busy that I don't care to advertise that much. |
|
|
| DelSoln |
| Hey Saleen the place I went to managed to get out all of the dings with the exception of one right near the roof. If I sent you a pic would you be able to tell me if you could get it out without removing the headliner? Thanks. |
|
|
| Saleen880549 |
A picture may help.... but sometimes it takes some thinking to figure how to get to a tough dent.. not just by a picture.
mrdent@shaw.ca is my email...... tell me the car and year too. |
|
|
| ludakelv |
quote:
Originally posted by Saleen880549
My pricing is very good.. as I am a one person operation with low overhead .... I dropped my price $25 for a young guy yesterday with a Civic with a few dents as it took less time then I pictured for some tough dents. He was happy with the work done and even happier when I told him it was cheaper.....
I keep so busy that I don't care to advertise that much.
Mr Dent worked on my Prelude and I'm very happy with the work that he did. He's a nice guy and on the level :thumbup:
MING gave me a 60% higher quote :rolleyes: |
|
|
| Saleen880549 |
quote:
Originally posted by ludakelv
Mr Dent worked on my Prelude and I'm very happy with the work that he did. He's a nice guy and on the level :thumbup:
MING gave me a 60% higher quote :rolleyes:
Thanks.... I try and keep the prices as low as I can..... keep overhead low..... too.... to keep prices low and still do very good work. |
|
|
| Mustard |
Me and Brian (Saleen821094809875098713259874) go back a little...
i used to see him turn some pretty crazy stuff into "was there anything wrong, i can't remeber"
nothing to worry about with him at all...
(Hey Brian! it's me, BBJ paint guy (that quit) from avis yard. I saw youon the road the other day and smiled, but i wasn;t in in my blue Suzuki, so you didn't recognize me!) |
|
|
| Saleen880549 |
quote:
Originally posted by Mustard
Me and Brian (Saleen821094809875098713259874) go back a little...
i used to see him turn some pretty crazy stuff into "was there anything wrong, i can't remeber"
nothing to worry about with him at all...
(Hey Brian! it's me, BBJ paint guy (that quit) from avis yard. I saw youon the road the other day and smiled, but i wasn;t in in my blue Suzuki, so you didn't recognize me!)
Maybe I thought you were trying to pick me up. smiling...... Don't remember...... maybe my brain was in think mode.. and didn't notice ya......
Ya, your boss ( x-boss ) always says to me.... I can't believe you got that out....... 14 years now fixing dents the PDR way.... I better have it figured out..... NOW, figuring out females...... never will happen. ha ha..... |
|
|
|
