| ccthompson |
i am looking for a set of exterior moldings for an 87 mk3.....
if you dont have a full set but have the any of the drivers side molding then that is fine too.... |
|
|
| Deep_Blue |
You might want to also consider upgrading to the 89+ mouldings if you have the spare change. I saw that you had a bit of rust on one of yours. The thing is that the 87-88 mouldings are metal and they rust from the inside out. I'd bet that you have rust on the inside of other ones too. The 89+ ones are plastic so they don't rust. I've got pics from when I replaced one of mine that I'll show off when I go home for the Christmas break.
I'm once again going to recommend online forums for the best place to find these. That or ebay might have some.
Cheers,
Tim |
|
|
| ccthompson |
ok so about how much would i be looking at for a set of 89+ moldings???
and thanks alot for your info and advise :D |
|
|
| HeavyEarly87T |
Ah, the moulding issue again.
Here is the deal. Toyota wants $1500 for a set of 89+ if they can find em.
You can surf the major Supra forums out there and post a wanted & bump it every month. You will get a reply and it will cost you anywhere from $200 to $600 plus shipping for them. You will need to have the cash on hand and a paypal account for payment. Unless you are lucky enough to find a wreckers that will take a plastic card.
As time is removing Supras from the road at an alarming rate I have no doubt you will find the mouldings you want by spring.....provided you are on top of the game and watching the forums always.
Now that said I have been told that some have gone to auto supply stores and bought a roll of moulding that is almost the same and painted it and custom cut it to replace what was on the car. It is a bit of work but I expect it to be allot cheaper. It’s up to you.
URL
:cool: |
|
|
|
