| prada_2o0o |
| wheres a good place to get machine work done.... i need my flywheel lightened to about 11-12 pounds.. and my b16a2 head ported and polished..... but i need to book it so its done the same day or within 3 days ... let me know where anyone recommends |
|
|
| 1mns13 |
| Campbell Machine should be able to give you names or help you out. |
|
|
| scooby_dooby |
| I was also wondering a good place for Headwork, must be experienced with Honda's... |
|
|
| mrprecidia |
| I hear extreme machine does good work. |
|
|
| scooby_dooby |
Was that for a Honda? I'VE checked out their site before (great prices) but all their pics are of Domestics.
From what I've heard Headwork all comes down to skill and experience and you really want someone experienced with small displacement engine's. |
|
|
| CanadianR |
| Yes, don't take your head to someonewho works on domestics (muscle cars v8's) i wouldn't let anyone who doesn't have lot's of experience with Hondas, and specifically Integras touch my head. I have no idea if there's anyone in Edmonton that would be trustworthy to do a port and polish on an intrgra head, not to say there isn't anyone i just don't know of any. Have you ever considered Extrudehoning your head? While you wouldn't get quite as impressive of results as an expert 5 angle port and polish would give you it would be similar and alot more safe( ie. much less chance of f*#king your head up). If you're interested there is someone in Edmonton who has an extrudehone machine, he's in the same shop as Stew's Dyno is and he just started up. Also, it would probably be a fair bit cheaper than a full port/polish. |
|
|
| talont3t4 |
| Extreme did work on my head! Also on several other imports I know of! Ask for Paul and tell him Ron sent you he well hook you up! Very friendly and very open to imports! |
|
|
| Inzane |
Check out EC Automotive, up on 118ave.
They did a great job on my flywheel for my 300ZXTT last year. And they rebuilt the heads on my friend's 300.
The last time I was in their shop, they had a Lamborghini engine in there.
They are definately import friendly. And their rates seem to be reasonable as well. |
|
|
| scooby_dooby |
| this is great, keep em comin... |
|
|
| scooby_dooby |
quote:
Originally posted by talont3t4@Mar 9 2003, 12:04 PM
Extreme did work on my head! Also on several other imports I know of! Ask for Paul and tell him Ron sent you he well hook you up! Very friendly and very open to imports!
thx bro, I will |
|
|
| HKSpowers |
Try the "Block Shop" on 118 ave and like 142 st I think, some of these guy's have been doing engines for 2 decades.
:D |
|
|
|
