| Rollerwave Pistons - Click HERE for Original Thread |
| CYA |
i'm not looking for your friend's, cousin's, brother's, next door neighbor's, hair dressor's, husbands, newphew who talked to some guy over the internet who "says" he used them... rather i'm looking for someone you know personally who has used them. so if you do know someone please post their opinions about the pistons themselves and larry widmer's customer service and tech support.<p>thx
cya |
|
|
| seven |
| you can talk to James (Prelude) about their crappy customer support. |
|
|
| seven |
| forgot to mention James didn't do any bottom-end work but i think he got head work done through Widmer. |
|
|
| CYA |
| oh ya... forgot about james. but is it fair to say their support is crappy without knowing both sides of the story in full?<p>we don't want to spread unfair "rumors" over the 'net.<p>you know how it goes... say one guy has a problem with an ATI blower and then posts it on a board. all the newbies read that and start spreading rumors that such and such a blower sucks. then next thing you know there's people slamming a product cause some guy didn't install the oil feed line properly or something like that. |
|
|
| seven |
| fair or not, thats obviously one person's opinion. take it that way. |
|
|
| CYA |
| ok... "fair" enough based on my original post.<p>now let me add to it... <p>i want opinions on their products, services, etc... and i also want to know why you have those opinions. not just endyn sucks... or endyn rules. <!--emo&;)--><img src="http://www.asianet.ca/images/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'><!--endemo--><p>cya |
|
|
| hondaluva |
| They're good.<p>Conceited too, from what I here. |
|
|
| CYA |
| dude... please tell me why you think that they're good.<p>conceited yeah... i agree there... just cause of the way he responds to ppl on his board. but just cause he's conceited doesn't mean one shouldn't buy his products.<p>cya |
|
|
| TurboBlueNX |
| Mike Kojima suggests using SRP or Probe Industries if you're looking for custom units. <p>He tells me the're very friendly. |
|
|
| CYA |
| "friendly"... you mean the customer support? or do you mean "friendly" in terms of battling detonation?<p>cya |
|
|
| RaGingAngeL |
| CYA....mail me for more info if you are seriously interested....<p>I know at least a few peeps who are close to me who run them....I can already count 4 off the top of my head....<p>dc2rpower@canada.com<p><p> |
|
|
| 98Luder |
Sam, the RW pistons run with good gains. I have seem ppl in Seattle run them in their TypeR 's with about 12.5:1 cr and on 92octane. There are a lot of articles on T.O.O. website. Check it out.
I won't say what my mods are till I dyno next year. I did chose to keep the stock cylinder bore. Please dont' discuss too much about the mods to ppl, as I'm kinda shy about that :)<p>Larry is kinda cranky at times but I belive in his work. The guy may work out of his house, but hey, if he can do what he claims why not. The RW pistons are produced by Weisco and you'll need to bore the small end of the conRod a bit to fit the wristpins. |
|
|
| APEXSER |
| All I can add to this is the fact that Endyn's pistons are produced by Wiseco. I have used Wiseco pistons in the past with no problems at all. I am not for nor against Larry or Endyn in any way, shape, or form. Like I said, Wiseco pistons are ok with me! |
|
|
|
|
|
