| RE-8 |
| I took out the battery for my remote carstarter today, now i cant auto open the doors or set my alarm. is there a way to set it ? |
|
|
| cooldude117 |
| Check all of your fuses to make sure that you didn't blow any. |
|
|
| Orzel_pl |
| I believe you might have to program the remote again. I know with 95+ 240's you have to stick the key in fully and out fully 6 times in a period of 15 seconds, then start the car to program the remotes. The same could be true for your vechicle but with a different process. That or the batteries you put in are dead. |
|
|
| Orzel_pl |
Try this, I googled it and this is the instructions I found for 99' Fords, it just might work.
1) Turn key from OFF to ON eight times within 10 seconds ending
in the ON position.
2) After doors lock then unlock, press any button on the
remote being programmed.
3) The doors should lock/unlock to confirm programming.
4) Turn key to OFF and door locks should cycle one last time. |
|
|
| gab |
| what brand of remote starter is it? |
|
|
| englebert |
| its easier to go back to the place you got it installed at and ask them to fix it |
|
|
|
