| talonstylz |
I'm looking to sell or trade my Eclipse for a newer style suv, i need something more practical for my upcoming job.
Here is the mod list:
Walbro 255 hp, with rehar.
B&M fpr
FIC 750cc injectors
Magnus intake manifold
Powdercoated fuel rail
Tubular exhaust manifold
Tial knock off external wastegate (14 psi spring)
t3/t4 (50/63 a/r) turbo
Custom 3" turbo back exhaust with borla muffler
Kinetic front mount intercooler
HKS SSQV blow off valve
2.5" cold pipe, 2" hot pipe
ACT 2600lb clutch
ACT lightened flywheel
Maf translator and 3" maf sensor
JDM switchable transmission with longer first gear
Prothane engine mounts
prothane control arm bushings
Boost, a/f, egt in triple a pillar pod
Volt meter in where the cigarete lighter used to be
Vis oem carbon fiber hood
FX designs rear bumper
5% tint all around
Black leather rear seats
Bride brix in the front
Battery was relocated to the trunk with a taylor box
ABS was also eliminated
I know theres still a bunch i'm forgetting.
Now the condition:
The good-
The oldest parts on the car were put on about 4K miles (not km) ago, the intake mani, injectors, turbo, wastegate, exhaust mani, have under 1K miles on them, the hood was on my car for maybe 200 miles if that.
The timing belt, water pump, etc... was all done less then 200 miles ago. The car runs amazing, VERY fast, no leaks, doesn't burn anything. The engine has about 100K km on it.
The bad-
I would say it needs a paint job, needs new windshield, the car itself has 160K miles on it.
Now this is not a talon converted into an eclipse, this is an actual eclipse from the states, it is in miles per hour, and has the power seat belts.
The rims are sold so they wont come with the car, the car comes with factory eclipse rims, and factory talon rims, also comes with more spare parts then you'll know what to do with.
I'm looking for $7000 obo, but i'll consider any resonable offers.
The car makes well over 340 horse at the front wheels, its been dynoed at Apex modified. This was achieved at 14 psi, and 91 octane, so the car is capable of well over 400 at the front wheels with some minor tuning and better gas.
This is an AWD car.
I will try and answer your quastions as best as i can, thanks. |
|
|
| jdmtalon |
| seen the car in person, very nice ride with lots of $$$$ invested. good luck with the sale :thumbup: |
|
|
| edmCRX |
wow that's a huge ass fmic!
bump for a sweet deal |
|
|
| talonstylz |
| Thanks guys, hopefully she goes to a good home, that will put as much love in her as i did.:thumbup: |
|
|
| talonstylz |
Just remebered the dyno run was done on smaller injectors, and before i put the magnus intake manifold on.
quote:
MAGNUS SHEET METAL INTAKE MANIFOLDS
Proven to make over 40 hp at the wheels on Mitsubishi applications.
Offer excellent spool up characteristics and huge top end power increases over the factory intake manifold.
Featuring a velocity stack design, and CNC machined flanges, all of our intakes manifolds are hand made and welded by our craftsmen in-house to ensure the strictest in quality standards.
Weighing in at a scant 6lbs over the factory 15 pounds, and mirror polished at no extra charge. You can see why it is the top choice among Mitsubishi tuners, racers and streetcars alike.
The DSM intake manifold has been updated for 2005 featuring .125" material all around, and CNC radiused velocity stacks at no extra charge.
The worlds fastest EVO's and some of the worlds fastedt DSM's run on the Magnus sheet metal intake manifold
Turbotrix 9.77 Mistubishi Evo 8
Dynoflash 9.98 Mitsubishi Evo 8
Marco Passante 9.50 @ 150 1997 Eagle Talon
Francois Villeneuve 9.70 Dodge Colt 4G63 FWD
Brad Davis 10.66 @ 133 1993 eagle talon
Evan Cline 10.55 @ 130
Brian Pagel 10.40 @127 1995 Eagle Talon FWD
All of these cars have equipped themselves with the best intake manifold on the market, coincidence? I don't think so, Bangs for the buck there is no better mod out there.
We offer direct Nitrous plumbing and nitrous installation on, Nitrous bungs, Larger throttle body flanges, additional bosses, additional fuel rails for staged injection. We also design custom and one-off intake manifolds for your application. Our new SPL intake manifold offers full 180 degree radius CNC velocity stacks for even increased airflow.
Because all fabrication is done in house, Magnus can custom tailor your manifold to your needs. Special one-off intake manifolds can be created by request, and for different vehicles.
Taken directly off their website. This alone retails for $660 USD plus shipping. |
|
|
| domenico_169 |
BUMP for a super fast and GREATLY taken care of DSM :thumbup:
this is a steal considering the price of all the aftermarket parts in this thing. |
|
|
| talonstylz |
:blue:
i need to get into an suv.:D |
|
|
| talonstylz |
| offers? she's begging for a new home.:thumbup: |
|
|
| TopGunner |
| Accidents? How bad is the windsheild? What was the original color? |
|
|
| talonstylz |
quote:
Originally posted by TopGunner
Accidents? How bad is the windsheild? What was the original color?
No accidents that i know of or showed up on car fax, also doesn't appear to ever been in an accident, so i would say no, original color was red, my plan was to go back to that color, but i never got the chance, the windshield isn't to bad, but i dont think it will pass inspection, i know you can get a new one installed for about 200-250 for these cars as my friend just had his replaced. |
|
|
| TopGunner |
| Tried sending you a PM , your inbox is full. Kinda interested lemme know whats the status on this car. |
|
|
| talonstylz |
| sorry about that, try again.:thumbup: |
|
|
| talonstylz |
| 6750 obo, i need to get into an suv right away, will also consider a decent 4 door car. |
|
|
| talonstylz |
| Lots of talkers, wheres all the walkers? |
|
|
| TopGunner |
| Ill be walking to your doorstep with cash on monday, thanks |
|
|
| talonstylz |
quote:
Originally posted by TopGunner
Ill be walking to your doorstep with cash on monday, thanks
Thats the type of people i like.:thumbup: |
|
|
| talonstylz |
quote:
Originally posted by TopGunner
sold sold sold
:( please take care of her:( |
|
|
| 95EagleAWD |
quote:
Originally posted by TopGunner
sold sold sold
Have fun with it... nice car! |
|
|
| HollaBalla |
| maybe i jsut canst see the price, but how much u sellin it for? |
|
|
| TopGunner |
| Sold my friend; to me a long time ago |
|
|
|
