| FS 1993 Single turbo RX-7- VERY Modified-Absolutly mint condition/show car - Click HERE for Original Thread |
| sub-zero |
I have decided that it is time to sell my car that I have spent many hours putting together over the last years. The car is mint inside and out and I have changed every bolt and wire on the car. It is a Candian award winning show car and had the honor of taking the Castrol Candian car cover search award and article(I have saved). I have it tunned @ 22 psi street and have enough fuel to run 27 or so psi on a mixture of C12 and prem. I have not used the car for the last two Summers besides a few shows that the car was sponsored by BFG. I have only put on about 4000 miles at the most on the new rebuild. I have over 60,000.00 CDN invested about 51,000.00 US.
I am taking offers for the car but will not go less then 35,000.00 US.
I know this is high but there are only a few RX-7`s out there that have been finished like this one.
Here is a link to a thread with pics.
http://www.rx7club.com/showthread.p...hlight=sub-zero
If you have questions and are serious please eamil me at rocky.choc@shaw.ca
Mod. List for 1993 RX-7
Engine
-fresh rebuilt 1.3 litre 13BREW rotory, steetported and 3mm race seals(all sensors and wiring replaced)
-Garret GT 67/63 mm compressor with a .96 Ptrim hotside
-SS manifold made by Davinci Motorworks
-SS HKS midpipe
-HKS carbon fiber titanium catback
-HKS wastge gate
-Tial BOV
-Fludyne radatior
-Petit air seperation tank
-Greddy elbow
-Greddy intake
-Greddy rad cap
-Mazda Speed oil cap
-Custom intake piping
-Apexi front mount intercooler
-Aquamist water injection
-MSD 6a firing leading plugs
-MSD Dis 2 firing trailing plugs
-MSD Blaster coils on traling
-MSD twin post motorcycle on leading
-MSD wires
-Nitrous Express Ntercooler
Fuel system
-Aeromotive Eliminator race pump located under tank
-custom sumped tank
-Aeromotive ss race filters
-10AN ss feed and 8 AN return fuel lines( and all the fittings)
-SX fuel pressure regulator(set @ 55 psi base)
-2 720cc top feed primary injectors in custom rail
-2 1680cc top feed secondary injectors in custom rail
* lots of polished parts and powder coating *
Driveline
-Kazz LSD
-Rebuilt and upgraded tranny
-ACT Extreem clutch and pressure plate
-SS clutch line
-Engine torque brace
-Rear diff brace
Suspension
-Tein Flex coilover system
--K2RD toe links and trailing arms
-Suspension tech. sway bars
-Brembo barkes with Hawk pads
Electronics
-APEXi Power FC stand alone ECU
-Tech Edge wide band O2 system
-Datalogit
-APEXi AVCR boost contoller
-Greddy fuel pressure gauge
-Greddy EGT gauge
-Greddy boost gauge
Interior
-Restored black leather seats
-Narde D cut staearing wheel
-MOMO sfift knob
-Team Voodoo ebrake
-Auto meter pods
-Sled Driver pedals
-Chromed door sills
-custom Mazda tornado silver panels
-Custom leather ebrake and shift boots
-Custom Kirk racing rollbar-chrome
-Corbeau A4 seats with the leather option
Exterior
-Mazda Speed GTC front
-99 spec combo lights
-East Bear headlight conversion kit
-Custom polished aluminum undersweep
-Carbon fiber door handles and gas door
-FEED CF side skirts
-CWEST rear bumper with custom heat sheild
-99 spec raer lights
-JSP Blade Carbon fiber rear wing
-Fresh Sikens paint
-17 inch Ceasar Madhi race wheels running 275 rear and 245 front
-Scoot CF hood(stock hood included and painted)
That is all I can think of now.
Thanks
Steve Austin
403 5270550
http://img116.imageshack.us/my.php?image=carpics0050ja.jpg
http://img116.imageshack.us/my.php?image=carpics0044rg.jpg
http://img116.imageshack.us/my.php?image=carpics0179kt.jpg
http://img116.imageshack.us/my.php?image=carpics0111cb.jpg
http://img236.imageshack.us/my.php?image=wing0207qy.jpg
http://img116.imageshack.us/my.php?image=wing0421ww.jpg
http://img116.imageshack.us/my.php?image=carpics0065nq.jpg
http://img103.imageshack.us/my.php?image=carpics0075hl.jpg |
|
|
| jdmtalon |
pics dont work
edit: i got it to work now |
|
|
| 92_WhItE_H23 |
| go to the club site and go to marketplace his pics are in there.. not a bad lookin rx-7 pretty beast. |
|
|
| sub-zero |
Well they did work?
Please email if interested.
|
|
|
| crazyrx7 |
Sweet ride but why are you selling such a beast? If I were you I would ask more for the car as its done right and like you said it would cost you a fortune to duplicate it.
R.K. |
|
|
| Michael_1101 |
| would you take 22,000 cash? |
|
|
| Rich_A |
quote:
Originally posted by Michael_1101
would you take 22,000 cash?
no lowballing. |
|
|
| jdmtalon |
quote:
Originally posted by Michael_1101
would you take 22,000 cash?
the guy already said no lower than 35,000 US. :rolleyes: |
|
|
| 92_WhItE_H23 |
| pics 2 and 4 work.. the rest dont.. |
|
|
| sub-zero |
I would never sell this car for 22 cash as it is a Viper eater and looks way better in my opinion. I would miss this car very much if it sells and am in no rush at all. If you see this car in person then you will understand. I will try to make it to Calgary SCN or Driven to show the car one last time.
The only reason for the sale is that I have two kids and dont have the time to use the car. It sits in my garage all year, but the odd day i do get it out for a quick blast. It is all out insanity!!! The turbo I have now has made it very streetable if you can drive. I was running a T-72 compressor that would not reach full boost untill 4800 rpm and then WHAM tires spinning going into third with drag radials and at 70 MPH. I have went through 4 different turbos and have spent hundreds of hours tuning and learning to tunr this car. I have not found one person in Canada to help me tune the Apexi Power FC. With the wide band and the amount of available fuel I have ,it made it easier for sure. This car can push over 30 PSI with the ignition and fuel setup.
I will only sell the car to someone that can respect the power it has and appreciate the amount of work that has been put in. My Brother who has a modified twin turbo Z calls this car a " coffin on wheels".
Thanks for looking
Steve |
|
|
| bigmack000 |
WHAT THE FUCK STEVE! good luck with your 2nd child :)
Joel :thumbup: :beer: |
|
|
| Alberta_Daytona |
:omg: :omg: :omg: :omg: :omg:
I wish I had the money. |
|
|
| AzNxIntegraR |
| nice car man |
|
|
| bigmack000 |
| i personly know steve and the car he;s a great guy and it is an amzing car worth every penny!!:thumbup: |
|
|
| Honda_Finatic |
| definately looks awesome :thumbup: |
|
|
| sub-zero |
Thanks guys.
Joel, I will try to call you tonight. |
|
|
| ehos |
Hands down, THE best car that's EVER been posted in this forum for sale.
Nice FD! |
|
|
| Shady_Pro |
| where is the car located? |
|
|
| bigmack000 |
quote:
Originally posted by sub-zero
Thanks guys.
Joel, I will try to call you tonight.
Sounds good man
:thumbup: :blue: |
|
|
| sub-zero |
| The car is in Medicine Hat. |
|
|
| Ammo |
wow if i only had the money:drool: :drool: :drool:
sweet car man:thumbup: |
|
|
| JDM300ZXZ32 |
quote:
Originally posted by Ammo
wow if i only had the money:drool: :drool: :drool:
sweet car man:thumbup:
x2 :mad: |
|
|
| Fish_e_o |
even if i had the money i wouldn't buy it!!!
it's just too nice for me and probably way to fast!!!
this better go to a responsible person..
i don't want to see this car wrapped around a streetlamp
:fingersx: |
|
|
| sub-zero |
| New Wheels and tires are on so buyer can pic between either new set. |
|
|
| R3action |
| omg i can't stop drooling....nice car dude |
|
|
| danayanch |
| Extremely nice car. What a great FD. Props to you steve. |
|
|
| sub-zero |
| Going to Auto Trader and Ebay. I will post the Adds. |
|
|
| morningla |
| how did the sale go on ebay/trader? |
|
|
| Tyangelo |
| Not the slightest bit interested in imports in any way but the rotary has always impressed me. Have to comment on the excellent restore job!:thumbup: :beer: |
|
|
| Alberta_Daytona |
| over 6 months old, but i remember the pics.....:thumbup: |
|
|
| 92_WhItE_H23 |
| he sold this last fall...i wanted to buy this bad boy ahah |
|
|
|
|
