| Integral_21 |
Hey guys new to the fourm, names Dustin im the guy that bought J.P's MR2.
I need alittle help theres quite a few km's on the car and im very intrerested in swaping the engine id like the same engine or bigger also with a bigger turbo something thatll push 20 to 30 psi.
Also id like to have the engine with all new parts (water pump, alternator, etc..) if you guys know anyone or a shop that could do that for me or any info what so ever would be much appreciated
Even just your thoughts on what i should do would be great the more info the better its just i dont have much time im really swamped at work.
Also any info on HID assemblys would be great too.
Thank-you |
|
|
| mr2boi |
jdm source!
or speedtech in calgary
I went with jdm, great guy! i can give you phone numbers if you want |
|
|
| rickjames_mr2 |
Contact Rob (Rdscelica), he`s done a few swaps, he may be able ot give you some advice.
That`s where I take my car.
BTW, welcome to the club! |
|
|
| RDS Celica |
Do you want to stick with gen2 or go gen3? 20-30 psi is ALOT of boost and you wont be able to push that on pump gas no matter what turbo you are using. Most mid-HP turbo kits willl typically give you 300-350 HP at 17-18 psi on a stockish motor with supporting mods. I know JPs car very well doing work on it through-out the years and its good to see your taking it to another level.... You have a ton of options to choose from if you want to make 300-400 hp, just a matter of what type of power you are looking for and how much you want to spend. It gets expensive very quickly as little things add up.
If you want to discuss anything or need some info drop me a PM or call me at my shop 628-4617. |
|
|
|
