| Nis13 |
| Im finding it impossible to find the 2-1 piece downpipe/flex pipe/ or elbow which ever it is called.. or anything close to it that will work.. any one know where i can get one? |
|
|
| Nis13 |
| or should I just chop the pipe before the car and weld in a pipe to the text pipe or resonator and pipe to the muffler? |
|
|
| 1_Bar |
| spoon only made the top half of the header IIRC, find a JDM downpipe (pipes are wayyy bigger then the USDM and flow nicer) and use that.... |
|
|
| Nis13 |
| i can put a test pipe from my 2-1 part of the factory header correct? |
|
|
| 1_Bar |
quote:
Originally posted by Nis13
i can put a test pipe from my 2-1 part of the factory header correct?
yes, but note the JDM downpipe is longer as the cat sits further back in the car, you will have to do some trimming somewhere, I would cut the downpipe to USDM specs, run the test pipe and run the proper USDM sized exhaust. Less hassel when you change your exhaust.....
You have some sort of fuel management I take it? |
|
|
| Nis13 |
well its supercharged.. piping is not an issue i think ive decided on 2.5.. my main concern is getting rid of the facotry downpipe.. if i could replace that with just a pipe? then id do that to not to sure if i could though? putting it up and checking it out my self is an issue cause its real low..
im thinking a test pipe could replace that? simple bolt on the the 2-1 flange? does anyone knwo how big that is? custom pipe and welding shouldn't be an issue from there i think? |
|
|
| 1_Bar |
| so if its supercharged, are you running some sort of standalone fuel management on the piece of crap JRSC piggy back?? I ask cause a test pipe will cause the ODBII motor to run into limp mode.... |
|
|
| 92_WhItE_H23 |
quote:
Originally posted by 1_Bar
so if its supercharged, are you running some sort of standalone fuel management on the piece of crap JRSC piggy back?? I ask cause a test pipe will cause the ODBII motor to run into limp mode....
hes running a chipped p28, running on uberdata software. |
|
|
| Nis13 |
quote:
Originally posted by 92_WhItE_H23
hes running a chipped p28, running on uberdata software.
|
|
|
|
