| SRBURG13 |
1991 240sx (LHD!!!). This vehicle is severly moddified.
There are numerous reasons for why I am selling. Mainly because I need a car that I can use everyday, and leave downtown, without getting broken into, and I cannot afford to buy another nice car (yes, I'm picky, lol).
This vehicle has NOT been drifted/bagged on/tortured and there are many members here that can vouche for that. This car has been kept in EXTREMELY good condition. Never smoked in. Never winter driven, EVER. I am the second owner, the first of which had this car garaged it's whole life.
The car itself has 23X,XXXkm on it. The engine was just rebuilt in July. It currently has about 2000km on it. It was just recently broken in, and hasn't been proffessionally tuned yet; so it is running rich, with some timing retarded, to keep it in the "safe zone". The engine is running Castrol Syntec 5W50. Tranny has Redline fluids.
The vehicle was painted 2 summers ago, but the front bumper could use a respray, as there are many rock chips. Otherwise, the body is in exceptional shape. Interior is in excpetional shape, besides the usual wear on the drivers seat, which is minimal. Grey/black interior, with leather seats.
I have not had it dyno'd yet, so I am not sure on the actual WHP numbers this vehicle puts out. The bottom end is built for WELL over 500whp, but the turbo is currently the limiting factor at just over 400whp (Flows 44lb/min). With the down-tune, I would estimate about 370whp. Just need to tune, run higher octane fuel, and turn up the boost to 21psi, and you should be over the 400whp mark.
As you can imagine, there will be no test-pilots.
--------------------------------------------------------
MODDIFICATIONS:
Engine:
Nissan SR20DET Engine (Redtop)
Engine Build (Built July 2006):
87mm JE Forged Pistons; 8.5:1 Compression
JE Piston Rings
0.040" Overbore (1mm) (Works out to a 2.1L displacement)
Eagle H-Beam Connecting Rods
ARP Rod Bolts
Decked Block
Balanced Rotating Assembly
Polished Crank
Clevite Bearings (Rod, Mains, Thrust)(Clearance within Specs)
New OEM Oil Pump
New Intake and Exhaust Valves
New Valve Guides
New Valve Seats
Minor Valve grind
Cometic Metal Head Gasket
ARP Head Studs
HKS Step 2 Cam Shafts
Grex Rocker Arm Stoppers
Bolt On's:
Garret GT25R .86a/r Turbo
HKS Wastegate Actuator
SSA Equal Length Exhaust Manifold
Steel Braided Oil Line
Apexi N1 3” catback exhaust
Custom 3" Downpipe
SSA 3" o2 Extension
Greddy Style Big Capacity Oil Pan
Apexi Front Mount Intercooler
Custom Intercooler Piping with T-Bolt Clamps
TurboSmart SS Type III Blow off valve
Sock Air Filter
Infiniti Q45 MAF (Air Flow Meter)
Topspeed Intake Manifold
Tomei Top Feed Fuel Rail
MSD 72lb/hr Injectors (Bench tested)
Steel Braided Fuel lines
MR Fuel Pressure Regulator (Set at 49psi)
Walbro 255lph Fuel Pump
MR Pulley Set
ACT 6-puck Clutch
Toda Lightweight Flywheel
Short Shifter Kit
Electronics:
Apexi Power FC ECU w/ Commander (I'll throw in a lesson)
Blitz Dual SBC Boost Controller
Apexi Turbo Timer
Zeitronix Wideband o2 Sensor w/ Datalogging
Nova Alarm System
Exterior:
Custom Front Bumper (Japan Only Apparently)
GP Sports Sideskirts
Vertex Rear Bumper
Buddy Club P1 Wheels (Front 17" x 7" +35)(Rear 17" x 8" +32)
Kumho Ecsta Supra 712 Tires (Front: 215/40/17 Rear: 235/40/17)
PIAA Carbon Fibre Wipers
Pivot Headlight Controller
Mercedes ML Sidemarkers
Nissan 180sx Type X Position Lights (Japan Only)
Interior:
Techniq Auto detachable Steering wheel
AutoMeter Guage pod
AutoMeter Boost Gauge 20psi
Orion XTR 10” Sub Woofer
Sony Amplifier
Panasonic Head Unit
Custom Fibreglass sub box
Sparco Fire Extinguisher
Suspension/brakes:
D2 Coilovers
D2 Camber Plates
OBX Front and Rear strut tower bars
Energie Suspension Polyurethane Bushing Kit
Specialty Z Rear Sub Frame Spacers
Nissan 300ZX TT Brake upgrade
PBR Metal Master Brake pads
Stainless Steal Braided brake line conversion
MR C-Pillar Bar
MR Rear Lower Tie Bar
Extra Included Parts:
Tomei Circuit Stroke Stuts
Unknown Lowering Springs
Cusco Camber Plates
Rear 300zx Calipers
Rear 300zx Rotors
Rear Lower Tie Bar
Stock Intake Manifold
Stock T25 with Manifold
SR20det Block
Stock pistions and rods
Stock Oil pan
Old Timing cover
Whole Valve train
Set of Tear Drop wheels with 30% left tread tires
Set of Stock 240 wheels with winter tires (90% tread)
Spare Tire
Misc. small parts, which are always useful.
A bag full of misc. couplers ($5/coupler)
A bag full of misc. Intercooler pipe clamps ($5/clamp)
Misc. Tools used
------------------------------------------------
The price I am looking for will include all of the extra parts, including a few hour long (I'm sure) tutorial of the vehicle, so that the owner is not left hanging with something they don't know about. I will also sit down with them and give them the run-down of the PowerFC, and the general rules about tuning the car.
What I would like is around the $20,000 mark. As you can guess, there is FAR more money and time into this vehicle than that, so I think I'm taking a big hit on this one, especially to be selling at this time of year/market.
My only wish, is that this goes to a good home. I have owned this car for almost 7 years now, and I am extremely sad to see it go. I wish I was a millionaire and I could keep it. :D
I'm sure I forgot to add some detail, so feel free to ask away.
Here are the main points:
Fast
Extremely Fast
Clean body
No rust (just a tad starting on the front strut tower)
Emaculate interior
New motor
Definite one of a kind
Please PM me, email to anerenberg@hotmail.com, or call 780-266-0896.
$20,000 OBO, YES, BEST OFFER!! |
|
|
| cSw93 |
| God thats sexy, bump :) |
|
|
| dragon31 |
| WOW that engine is just wow |
|
|
| SRBURG13 |
| Thanks for the comments! |
|
|
| jizzajamers |
kosei's... still love those wheels...
killer 240 though man.. nice upgrades.. |
|
|
| Driven |
| Indeed i have seen this in person and it's outstanding. Good luck with your sale. |
|
|
| mike99 |
| ill give u 5 bucks and a bag of chips for it:dunno: :D , jk man , very very clean car, and pulls like crazy. good luck with the sale eren. |
|
|
| DeathBy240 |
quote:
Originally posted by jizzajamers
kosei's... still love those wheels...
Those are Buddy Club P1s not Kosei K1s.
I've seen this car being built over the last few years, and I know the owner has done a very meticulous job on EVERYTHING.
Hope it goes to a good home. |
|
|
| Savage |
| i have seen this little piece of powerful art driving around it is so nice. big props. |
|
|
| EDISKRAD EHT |
Damn!
I'm not much of an import fan, but i give mad props to that car dude. VERY NICE, AND CLEAN!:thumbup: |
|
|
| tennisboy |
| seen this car in person, really forces your eyes to protrude, so hot |
|
|
| crazyrx7 |
See all of these cars for sale and asking these type of prices makes me wonder/want to maybe sell my fd.:dunno:
R.K. |
|
|
| h22civic |
| Can I ask who put the motor together? |
|
|
| seevik |
| i was in the nissan cruise with you, just wow |
|
|
| ImporTuner |
nice engine
GL with the sale man:thumbup: |
|
|
| SRBURG13 |
quote:
Originally posted by h22civic
Can I ask who put the motor together?
I put it together. All bearing clearances are to spec, and all head, main, and rod bolt torque numbers are to spec. Fairly simple motor, nothing terribly complicated in assembling it. You just need the time and the know-how.
Thanks for all the comments! |
|
|
| h22civic |
quote:
Originally posted by SRBURG13
I put it together. All bearing clearances are to spec, and all head, main, and rod bolt torque numbers are to spec. Fairly simple motor, nothing terribly complicated in assembling it. You just need the time and the know-how.
Thanks for all the comments!
Sorry....I should have been more specific. Who did the machining and balancing for you? |
|
|
| SRBURG13 |
| EC Automotive. Gave them a torque plate to do it with. |
|
|
| SRBURG13 |
| Hell, I'm pretty much lookin for any price that is reasonable. |
|
|
| Danny_lude |
| bump nice would you go down to 16500? |
|
|
| SRBURG13 |
I would negotiate it a little more with you.
I can give you receipts for about $30,000 of items put into this car. |
|
|
| dtjohnst |
| Absolutely gorgeous. I wish I had 20k kicking around. I've got a friend in the market for a 240, I'll pass on the good word, but I think that's well above his price range though. But wow, gorgeous. |
|
|
| SRBURG13 |
| Appreciate it. Thanks. |
|
|
| Godzilla |
quote:
Originally posted by crazyrx7
See all of these cars for sale and asking these type of prices makes me wonder/want to maybe sell my fd.:dunno:
R.K.
SAY WHAT! |
|
|
| Skyline pride |
| i dout this will sell for 20 000 when now and days u can get a s2000 for this price. nice car thoe |
|
|
| SRBURG13 |
Hahahahahahhaa. :rolleyes: Ahhh yes, those ever so wonderful bone stock s2000's.
Thanks for the insight though, I feel better. |
|
|
| Danny_lude |
| if this car is not sold after this winter, I will take her off your hands for 18500.... |
|
|
| crazyrx7 |
quote:
Originally posted by Skyline pride
i dout this will sell for 20 000 when now and days u can get a s2000 for this price. nice car thoe
The only problem with the s2000 is that its small, slow and did I mention slow. I would buy this 240 anyday over a did I mention a slow s2000.
R.K. |
|
|
| silvia s13 |
quote:
Originally posted by crazyrx7
The only problem with the s2000 is that its small, slow and did I mention slow. I would buy this 240 anyday over a did I mention a slow s2000.
R.K.
X2 BUMP for a sick ride! |
|
|
| SRBURG13 |
Ya, that is a fine balance of sale price and seasons. No one wants to dish it out at the beginning of winter. I would definitely be willing to talk in spring and now for that price.
Thanks Rad (spelling?) and Mike |
|
|
| Driven |
quote:
Originally posted by crazyrx7
The only problem with the s2000 is that its small, slow and did I mention slow. I would buy this 240 anyday over a did I mention a slow s2000.
R.K.
Agreed stock S2000's are slow. I'd take this car over an s2000 also. bump. :thumbup: |
|
|
| DA_DSMTUNER |
| very nice 240 good luck with the sale |
|
|
| SRBURG13 |
| Well, spring is here, or soon to be, so the car is back up for sale. |
|
|
| SilviaDrifter |
| bump for aaron |
|
|
| JDub |
| really nice car dude! gl with the sale!:thumbup: |
|
|
| digitalvinyl |
| Bump for Aaron, great car |
|
|
| SRBURG13 |
| :fingersx: Thanks boys! |
|
|
| fredster102 |
| WOW , this thing is just amazing |
|
|
| Bad Egg |
| I have seen this one up close, and I have to say it is about the best 240 I have come accross. Very good attention to detail throughout. If you have high standards and the money, you won't do much better than this. |
|
|
| SRBURG13 |
Thanks!!
I'm thinking of bringing it out soon and taking it to make a dyno run, see what it will do.
Man I'm lazy though. haha. |
|
|
| SRBURG13 |
Put into the autotrader now for 22k obo. Offers will not be disregarded.
Need to get rid of this. |
|
|
| crawford |
| would you be willing to go to 18000 |
|
|
| RWD |
| i think he sold it already |
|
|
| SRBURG13 |
No it is NOT sold yet!
Crawford, pm sent. |
|
|
| SRBURG13 |
Bump!
Willing to dig to $20,000 |
|
|
| SRBURG13 |
Bump!
Willing to dig to $20,000 |
|
|
| SilviaDrifter |
| c'mon someone buy this car.....it was babied by aaron since he owned it |
|
|
| shawnis |
| check your pms please |
|
|
| SRBURG13 |
| Got the car fired up and out of hibernation. Couple of people interested, thank you! |
|
|
| SRBURG13 |
Well, after only 2 days of driving it, and missing every moment of it. The car is finally sold.
I think a part of my soul drove away tonight. |
|
|
|
