| jetpuff77 |
i would like to purchase a couple of parts for a 97civic si coupe (d16y8):
1. stock manifold or/ header must be in good shape (with gaskets if possible)
2. maybe a dizzy
3. spark plug wires
4. short throw shifterW/ bushings and related installation parts
lemme know if anybody has anything |
|
|
| jetpuff77 |
k definately need a manifold, and short throw. also need bushing that connects the shift linkage to tranny
Reasons: manifold has huge cucking frack, and the shifter is looser than a 60 year old hooker, no offense to you 60 year old hookers that post on 780 |
|
|
| Soulfly |
Grab a Shifter off ebay or something.. and Use some Teflon washers between the shifter and the Linkage... with some WD-40.. and Uhm.. a Shift linkage stabalizer bushing for the linkage will tighten that all up... I did it on my car.. Cause I Can't Stand a Sloppy shifter... :p
I'll lend a hand with the Install.. but Not out in this -20 weather.. :thumbup: |
|
|
| Britain |
| i have a stock header you can have for like 30 bux! |
|
|
| Soulfly |
quote: Originally posted by Britain
i have a stock header you can have for like 30 bux!
D16Y8 Chuck.. Not Y7.. :p |
|
|
| Britain |
| d15b motherfucker |
|
|
| jetpuff77 |
well.. about that -30.. i have a propane bottle and a garden hose.. we could heat up the muthafukin garage:thumbup: .. naw.. i have a heater that works not bad.. not t-shirt hot.. but a thick sweater hot.. but yah.. whenever your up for it!!
Still looking for a header/manifold (D16Y8) |
|
|
| jetpuff77 |
quote: Originally posted by Britain
i have a stock header you can have for like 30 bux!
will it fit on a y8? |
|
|
| jetpuff77 |
| nobody has anything.. still interested in exh. manifold/header!!! |
|
|
| stealth |
I have a DC Sports header, that I believe will fit.
160$
Please correct me if im wrong Trevor.
|
|
|
| Soulfly |
quote: Originally posted by stealth
I have a DC Sports header, that I believe will fit.
160$
Please correct me if im wrong Trevor.
Yes.. It'll fit.. Came off your Z6 Right? Yes.. it'll fit |
|
|
|