| Rich_A |
| 42 through 48 should work.. you can always add spacers to a 48 or higher rim to help with fitment. i've seen 50 work. |
|
|
| stealth |
I believe Civic and Integras try to utilize the same offsets.
With that being said, onmy old 95 Integra I ran +35 offsets on my rims. It was flush, maybe 1 mm past flush. |
|
|
| gfk. |
| well the rims i want are a 40 offset. would spacers work for that? |
|
|
| Soulfly |
quote:
Originally posted by gfk.
well the rims i want are a 40 offset. would spacers work for that?
+40's will be Perfect.. |
|
|
| fartcannon |
looks like your set scott
buy those rimssssssssss |
|
|
| Soulfly |
| Seriously.. between +45 and +35 or so.. You should be fine.. as long as it's a 7" rim.. But.. you should Try to stay close to +42, or +40.. one of those is stock.. :p |
|
|
| fartcannon |
| they are sevens so he should be good |
|
|
| Ethanol |
There is a NAPA on the south...
8107 Roper Rd
Edit: Oh @#$% wrong forum.. sorry |
|
|
| 94turbocoupe |
sorry if this is a thread jack but what if the rims are 17 x 8....with a +40 offset....could they work on a civic? or work with spacers, or would they be sticking out the well? im still trying to figure out all this width business....i had some wearing on a previous set of rims but it was on the inside....where the camber wear would be....
Steve |
|
|
| Soulfly |
quote:
Originally posted by 94turbocoupe
sorry if this is a thread jack but what if the rims are 17 x 8....with a +40 offset....could they work on a civic? or work with spacers, or would they be sticking out the well? im still trying to figure out all this width business....i had some wearing on a previous set of rims but it was on the inside....where the camber wear would be....
Steve
The Less the offest.. the more the rim will stick OUT.
So..eg:
A +45 Offset would be were stock steelies are.. and a +25 offset would be were those Spanish guys with the wire wheels set out past the rims...
The offset means.. The Mounting part of the wheel is Pushed out passed the Center of the wheel, Width wise..
And Offsets are measured in mm's.. so.. If you want to fit an 8" wheel in your Civic wheel wells.. then you might want to think about a +28 - +32 or so offset... or around there... :thumbup:
Or.. use your spacer... :p eather way works.. |
|
|
| fartcannon |
| haha spanish wire guys lol |
|
|
| fartcannon |
| oohhh and thank you for the napa address that was me who wanted it |
|
|
| Soulfly |
quote:
Originally posted by fartcannon
haha spanish wire guys lol
well shit.. you know they always have the low riders with the wire wheels... lol.. They ALWAYS Stick out past the wheel wells.. :p |
|
|
|
