| Need help guys - installing system on 04 Civic DX - Click HERE for Original Thread |
| greyfire71 |
| Like the title says I need help guys I have an 04 civic dx and am in the process of installing a system however I can't find a place to run my positive wire into the hood from inside the car I need help fast guys |
|
|
| THUD |
| There should be something on the fire wall, might be a bit up there or were all the wires come out to the engine bay little black plugs. |
|
|
| greyfire71 |
| I looked but can't really find anything |
|
|
| talonstylz |
the only place like that on your civic is near the middle of the firewall abit up, sorta behind your deck, i would recomend drilling a hole.:D
just be careful where you drill. |
|
|
| greyfire71 |
| thanks for the help guys ill see tomorow |
|
|
| 70newport |
| yea i agree drilling will probably be your best option. i learned the hard way how expensive it can be if you drill into something. so drill through with something small and see where it is comming out on the other side. then you can make sure you have enough clerance for a hole big enough for a power cable. |
|
|
| Britain |
| If you have to drill, drill throught an existing firewall plug. Take off your glove box. There's going to be a few plugs int he firewall behind it! Then just run it downt he ecu cover into the back to the amp!! |
|
|
| Ravendarat |
| Is this a manual tranny? If not than just drill through where the clutch would normally go through. |
|
|
| greyfire71 |
| well everything has been done for a week now went to future shop caught the instalation guy on his break and he showed me where they run it |
|
|
|
|
|
