| FS:Built block, stock head - Click HERE for Original Thread |
| Mekanik22 |
I'm selling my S13 SR20 redtop. It's a project that will never see the finish line so it needs a new owner. I'm unable to finish this and have upcoming things I need to deal with and also have no time to even get anything done so the project has to go.
The block has been bored 0.020" oversized, tank cleaned, new frost plugs, and had all measurements checked and passed all measurements with no problem. The crankshaft has been cleaned, balanced, and checked and passed with ease, great shape.
With a solid foundation, I also have the head, however it hasn't been cleaned or grinded for the oversized valves yet. But parts include:
-86.5mm CP pistons 9.0:1 compression - $930
-Crower titanium rods - $1350
-All Clevite bearings - $100
-ARP main studs - $120
-cometic headgasket - $150
-All ferrea head parts (dual springs, retainers, keepers, 1mm oversized intake and exhaust valves) - $1400
-HKS 272 Step 2 camshafts (12.5mm lift, BIG cams) - $500
-Jim wolf adjustable cam sprockets - $200
-Jim wolf valve guides - $170
-Greddy intake manifold - $600
-Power enterprises twin plate clutch with lightened flywheel - $1700
-Brand new nissan valve guides and timing chain and timing chain oil jet - $330
-ARP head studs - $80
-HKS rocker arm stoppers - $140
-Unorthodox racing lightweight crank pulley - $240
-GT35R turbo with .82 A/R housing (SALE PENDING)
THE BAD is: 1 rocker arm are gone, need exhaust manifold, need oil pan
All the above parts AND the VG30 tranny and adapter kit I'm looking for $12,000. But since thats unrealistic for normal joe smoe, will sell all engine stuff without tranny for $9000. I'll part out ONLY if I can get quite a few SERIOUS buyers for stuff as I dont want to be stuck with parts. Remebering all this stuff is BRAND NEW in boxes and I'm eating the shipping and handling on everything.
If no-one is interested in the chassis, I'll have cheap, aftermarket suspension parts for sale, a new heater core, and just stock 240SX parts. |
|
|
| Mekanik22 |
| I'm parting stuff out. Prices are up there. I'm also parting out the chassis so I have SOME stock stuff. The interior pieces are all re-done so it's not stock. |
|
|
| Mekanik22 |
| The GT35R turbo has been SOLD! |
|
|
| Mekanik22 |
Still these available! These are brand new, have 0 miles on them!
-86.5mm CP pistons 9.0:1 compression - $800
-Crower titanium rods - $1350
-All Clevite bearings - $100
-ARP main studs - $120
-cometic headgasket - $150
-All ferrea head parts (dual springs, retainers, keepers, 1mm oversized intake and exhaust valves) - $1400
-HKS 272 Step 2 camshafts (12.5mm lift, BIG cams) - $500
-Jim wolf adjustable cam sprockets - $200
-Jim wolf valve guides - $170
-Greddy intake manifold - $600
-Power enterprises twin plate clutch with lightened flywheel - $1600
-Brand new nissan valve guides and timing chain and timing chain oil jet - $330
-ARP head studs - $80
-HKS rocker arm stoppers - $140
-Unorthodox racing lightweight crank pulley - $240 |
|
|
| Mekanik22 |
NEW PRICES!
86.5mm CP pistons 9.0:1 compression - $800
-Crower titanium rods - $1100
-All Clevite bearings (Mains, cranks, and thrusts) - $100
-ARP main studs - $100
-cometic headgasket - $140
-All ferrea head parts (dual springs, retainers, keepers, 1mm oversized intake and exhaust valves) - $1200
-HKS 272 Step 2 camshafts (12.5mm lift, BIG cams) - $475
-Jim wolf adjustable cam sprockets - $200
-Jim wolf valve guides - $170
-Greddy intake manifold - $550
-Power enterprises twin plate clutch with lightened flywheel - $1200
-Brand new nissan valve guides and timing chain and timing chain oil jet - $330 (SALE PENDING)
-ARP head studs - $70
-HKS rocker arm stoppers - $110
-Unorthodox racing lightweight crank pulley - $200 |
|
|
| Mekanik22 |
| Bump. The car is going to get crushed in a weeks time if nobody wants anything else. I need garage space. |
|
|
| Mekanik22 |
| Hood, ingition cylinder, rad support, front fenders, old engine and tranny, have all been sold. If you need any parts, let me know. |
|
|
| Mekanik22 |
| Tons of inquires, but no action. These are brand new parts and the prices have all been dropped to sell! |
|
|
| jvdskyline |
| do you have injectors? |
|
|
| Mekanik22 |
quote:
Originally posted by jvdskyline
do you have injectors?
Sorry, no injectors. |
|
|
| Mekanik22 |
| Bump. Nobody wants to make more power or needs parts for an engine rebuild? |
|
|
| Mekanik22 |
86.5mm CP pistons 9.0:1 compression - $700
-Crower titanium rods - $900
-All Clevite bearings (Mains, cranks, and thrusts) - $100
-ARP main studs - $80
-cometic headgasket - $100
-All ferrea head parts (dual springs, retainers, keepers, 1mm oversized intake and exhaust valves) - $1000
-HKS 272 Step 2 camshafts (12.5mm lift, BIG cams) - $400
-Jim wolf adjustable cam sprockets - $150
-Jim wolf valve guides - $150
-Greddy intake manifold - $550
-Power enterprises twin plate clutch with lightened flywheel - $900
-Brand new nissan valve guides and timing chain and timing chain oil jet - $250
-ARP head studs - $70
-HKS rocker arm stoppers - $100
-Unorthodox racing lightweight crank pulley - $180
New prices, priced to sell. I'm taking a huge hit just to get rid of these. My priorites have changed and I need these gone. I have reciepts to prove anything. |
|
|
| Mekanik22 |
Unorthodox Racing pulley - SOLD
SR20 water pump - SOLD
SR20 alternator - SOLD
Power enterprises twin plate clutch with lightened flywheel - SOLD
Here's the list on whats left...
86.5mm CP pistons 9.0:1 compression - $700
-Crower titanium rods - $900
-All Clevite bearings (Mains, cranks, and thrusts) - $100
-ARP main studs - $80
-cometic headgasket - $100
-All ferrea head parts (dual springs, retainers, keepers, 1mm oversized intake and exhaust valves) - $1000
-HKS 272 Step 2 camshafts (12.5mm lift, BIG cams) - $400
-Jim wolf adjustable cam sprockets - $150
-Jim wolf valve guides - $150
-Greddy intake manifold - $550
-Brand new nissan valve guides and timing chain and timing chain oil jet - $250
-ARP head studs - $70
-HKS rocker arm stoppers - $100 |
|
|
| Mekanik22 |
| Every single part I have left AND the transmission (Link here:http://forums.780tuners.com/showthr...;threadid=60294) I'm letting go for $5500. Try finding a deal like that! I'm even throw in some suspension parts or strut tower braces for free! All stock SR20 parts, the head, all my aftermarket SR20 parts, brand new tranny with the conversion kit for the SR20 and 1 piece driveshaft and short shifter. Your getting a hell of a deal for all that! |
|
|
| Mekanik22 |
| Hit me up with a price! I'll take most offers! |
|
|
| Mekanik22 |
HKS rocker arm stoppers SOLD!
Here's the list on whats left... With NEW prices!
86.5mm CP pistons 9.0:1 compression - $600
-Crower titanium rods - $600
-All Clevite bearings (Mains, cranks, and thrusts) - $100
-ARP main studs - $80
-cometic headgasket - $100
-All ferrea head parts (dual springs, retainers, keepers, 1mm oversized intake and exhaust valves) - $800
-HKS 272 Step 2 camshafts (12.5mm lift, BIG cams) - $380
-Jim wolf adjustable cam sprockets - $120
-Jim wolf valve guides - $140
-Greddy intake manifold - $540
-Brand new nissan valve guides and timing chain and timing chain oil jet - $250
-ARP head studs - $70 |
|
|
| Mekanik22 |
| Make any offers! (Within reason) We'll work something out! |
|
|
| Mekanik22 |
-Ferrea dual springs, retainers, locators, and keepers SOLD
-ARP head studs SOLD
Whats left:
86.5mm CP pistons 9.0:1 compression - $600
-Crower titanium rods - $600
-All Clevite bearings (Mains, cranks, and thrusts) - $100
-ARP main studs - $80
-cometic headgasket - $100
-Ferrea head parts (1mm oversized intake and exhaust valves)
-HKS 272 Step 2 camshafts (12.5mm lift, BIG cams) - $380
-Jim wolf adjustable cam sprockets - $120
-Jim wolf valve guides - $140
-Greddy intake manifold - $540
-Brand new nissan valve guides and timing chain and timing chain oil jet - $250 |
|
|
|
|
