780Tuners Edmonton Car Forums
780Tuners Edmonton Car Forums Edmonton Car Forums > 780Tuners Edmonton Car Forums Archive > The Marketplace > Buy and Sell > Cars for Sale - Modified and Performance Vehicles

 
FS: RB25 240sx - Click HERE for Original Thread

z-force
its a 1990 240sx , i dont realy wanna sell it but if i get my exact asking price i will let it go otherwise its goin to storage till next summer. the car does need body work ( rusty wheel weels and sides and a dent on the passenger rear panel, i bondoed it myself i dont think anyone would wanna keep it this way tho) , i am not gonna lie its not the niceist looking from the outside. i spray painted it my self in my garage. this is a list of the mods on the car:

r33 rb25 ( how do i know its r33 , cuz the motor doesnt have an igniter chip, less parts to brake down :) )

F1 stage 2 ceramic clutch ( under 500km on it)

alluminum 3" koyo rad

Greedy intake manifold

custom 3" IC piping

mugan front mount intercooler

hks blowof vavle

custom drive shaft ( with 100,000km warranty)

s13 pos diff

full all around adjustable cusco coilovers

7 point cusco rollcage

front and back cusco strut bars

4 autometer gauges ( oil press, water temp, boost , A/f)

nismo steering wheel

momo shfiter and boot

sparco bucket seat with full 5 point harness

altezza tailights

17" konig's ( rubber is not bad)

custom 3" exhuast

under 1000km on hawk pads all around



there's probably a few i missed but these r the important ones, i am not gonna lie as i said the car doesnt look that nice, its mainly built for the track ,it goes sideways realy realy easy u dont need to clutch or ebrake just gas it :) i started this project last winter , its not realy finished but it doesnt need much work to make it a one of a kind drift car. this is a list of the bad's on the car:

needs steering rack ( 250$ brand new , will install for buyer for free)

vavle seals r starting to leak ( will do for buyer for half as much as anyshop would chrage)

the only problem i was having with the car , well its not realy a problem but the turbo and amount of boost was to small for the setup , so i start spoolong at like 2000 hit 6pounds at about 3000 and then i am cruzing till like 6000.

as i said before i dont realy wanna sell the car, i will end up doing a full internal build, a bigger turbo and a nice paint in winter if i dont sell it. my asking price is $12500, no 12450 is not ok, if ur not intrested or u dont have something usefull to say then spare me ur comment.

fatjoe
the fastest car i have been in so far. its an animal on the road. iv seen this thing murder 5.0 mustangs and wrx's pure sleeper.!

Wookey
quote:
Originally posted by fatjoe
the fastest car i have been in so far. its an animal on the road. iv seen this thing murder 5.0 mustangs and wrx's pure sleeper.!


I'm sure it is a quick car but beating a 5.0 and a wrx is nothing to be proud of.

SkiTLz
Just a FYI.

Theres a S1 and S2. S1 used an ignitor for the coils S2 didn't. Sounds a little confusing in your description.

Prudz_lude
quote:
Originally posted by Wookey
I'm sure it is a quick car but beating a 5.0 and a wrx is nothing to be proud of.


Agreed. 5.0 mustangs really aren't that fast

RBS14.5
If someone buys this and throws a boost controller @ 8psi you will pull very slowly on STi's and @ 12psi you can beat pretty badly.

5.0's are a vanilla ice fad car. Hooray for 302 motors in a gay chasis.

Good luck with the sale you will need it.

z-force
ya i dialed it up to 10pounds once, wow it was fast , no traction tho so i'd recomend realy good rubber along with the boost controler :D

Nis240
U do know that R32 never came with RB25. If you dont have the igniter chip on top then that means its a RB25 Series 2 engine.

z-force
anyone else want to comment on the rb25 with no igniter issue? bcz plz when ur done wrighting ur comment instead of clicking the submit reply button do me a favor and click the red button with the X on it on the top , that X stands for "stfu and spare me ur bullshit". if u know about cars that doesnt meen everyone does , by saying its from an r33 that means its the newer gen skyline than the ones we get . newer=better in buyer view.

diesekiel
Your sale just got eaten by this:

SkiTLz
quote:
Originally posted by z-force
anyone else want to comment on the rb25 with no igniter issue? bcz plz when ur done wrighting ur comment instead of clicking the submit reply button do me a favor and click the red button with the X on it on the top , that X stands for "stfu and spare me ur bullshit". if u know about cars that doesnt meen everyone does , by saying its from an r33 that means its the newer gen skyline than the ones we get . newer=better in buyer view.


Gee would I like to buy a car from you. I was helping you get your facts straight for the buyer. Not my fault you dont know your own car.

Good luck with the sale tosser.

z-force
i wasnt talking to u , u said it the first time , ok ur saying a fact about somthing. but then now every dumbass is gonna post a " do u know that its bla bla bla."
and dont tell me i dont know my car , i put every bolt and part in that car together, wut u should say is , i dont read a lot of magazines ;)

Beerking
any pics?

blitz
bump for a fast car

z-force
thanks jess, i dont think i am selling it tho, i am goin with internals for winter:D

blitz
yea man probally for the best ....
me too !

InitialD
quote:
Originally posted by Nis240
U do know that R32 never came with RB25. If you dont have the igniter chip on top then that means its a RB25 Series 2 engine.


that they did mister, rb25de in 4 dr skylines in 1992... FYI




Do you want to post a reply? This is the 780tuners.com archive, to participate in daily discussions on cars, visit our forums website and register today! Its free.

< Contact Us - 780Tuners Edmonton Car Forums - Advertising Info - Archive >

Powered by: vBulletin Version 2.3.9
Hosted by: Beyond Car Forums
Sponsored by: Replicon's Web TimeSheet - timesheet software
for time tracking Copyright ©2000 - 2008, Jelsoft Enterprises Limited.