| seluder22 |
Does anyone know what sizes I need for the hardware for the oem kit. I think Im gonna have to go to home depot and pick up the hardware there. Example the bumper bolts. What size or whatever do I need to buy of these? Clips nuts??? How do I know what size to buy?? Thanks to anyone that understands.
Matt |
|
|
| HKSpowers |
Your factory bolts should suffice but i'm not 100% sure i've only installed 2 kits and both used the original bolts and a few extra tapping screws.
If in doubt ask the manufacturer or the place your gettin the kit from. :bigthumbup: |
|
|
| seluder22 |
quote:
Originally posted by HKSpowers@Jun 16 2003, 06:58 PM
Your factory bolts should suffice but i'm not 100% sure i've only installed 2 kits and both used the original bolts and a few extra tapping screws.
If in doubt ask the manufacturer or the place your gettin the kit from. :bigthumbup:
Thank you. I got the kit used so Im SOL there. Im just hoping someone here will know more about these kits and the hardware. Im going to look into the original ones though. |
|
|
| vader_slri |
| Check H and A for some installation instructions for the kit. That should give you a better idea of the hardware you need. |
|
|
| Xx D-MAN xX |
quote:
Originally posted by vader_slri@Jun 17 2003, 05:17 AM
Check H and A for some installation instructions for the kit. That should give you a better idea of the hardware you need.
I can't remember if that site gives you actually part numbers.
You can swing by Yellowhead Honda and check with the parts department. They should be able to bring up the oem parts list and give you the part numbers of all the hardware.
I think the spring nuts, self taping screws and bolts are standard sizing.
Just a note, I did this for the garnish clips and they didn't fit. That's after I bought 10 of them and opened all the packaging prior to installing them :thumbsdown: |
|
|
|
