| FS: Big sale-Turbo kit,slicks,motor,gauges etc - Click HERE for Original Thread |
| 90hatch |
MT slicks
24.5X8x15 bought these this summer from Mopac for $430 have 10 passes on them.I cut 1.6 sixtys on them!
$350 shipped on wheels
Prothane inserted mounts for EG/DC with Bseries these are much stiffer then Energy Suspension and the drivers mount is fully repleced with urethane.These will give you vibrations but stop wheel hop and really firm up the shifting etc.Drivers engine mount,rear tranny mount and passenger tranny mount.
I will throw the other two in my sandblast cabinet and re paint them black this week so they look good.
$135 shipped
Paypal[verified],online bank trasfer,money order or other arrangements can be made for payment.Shipping for engine is via CFL truck as it needs to go on a pallet other packages sent Canada Post express for small items or greyhound for slicks and Purolator for turbo kit.
Vouches- Jeff Baker, easy16valve, Lococoin
VCC Civicguy604,audiobahncrazy,VTecpower,r_honda,bj_ph
ogi, tokenbrownguy,littlevtec and some others
Ebay- 6698matt
Homemadeturbo-90dx |
|
|
| BB240 |
| is the tranny going with it? |
|
|
| 90hatch |
| No the tranny is not inlcuded that will be getting rebuilt with goodies for the new setup.Thanks |
|
|
| baker_jeff |
| This guy is reliable and will ship you your goodies fast! Bump for wicked deals. I'm very tempted to grab those rad hoses from you, as mine are ugly. :cool: |
|
|
| BB240 |
| damn lol my car needs a tranny |
|
|
| Lost^ |
| if only you weren't selling the turbo kit til spring time :( |
|
|
| xJoshx |
| PM'D Message box full. I would like to pickup the rad hoses and the spark plug wires let me know how much you want for the wires :) |
|
|
| 90hatch |
| There is a deal pending with the rad hoses and rad so I will let you know if that doesnt go through,The plug wires are staying with the motor but you can get NGK plug wires at any parts store there not really that expensive and i would recommend them as there good quality.Thanks |
|
|
| BB240 |
| so is this engine ready to be dropped into a car? Is there anything it needs and would it be ok for a street car? |
|
|
| 90hatch |
| Yes engine is ready to drop in needs your engine harness and drop it in the car.It is fine for a street car its a stock LS motor same as the thousands of other non vtec Integras driving around.It has the ARP studs,intake mani etc but nothing that effects driveability or anything of that matter.Thanks |
|
|
| FLICKER |
| you wouldn't happen to have a power steering pressure pipe that goes right into the pump would you?? need one and don't feel like shelling out over 500 bucks for a new one! |
|
|
| 90hatch |
| I will check if i have one lying around i just did a dump run and threw out alot of various Honda parts as they were really piling up.If i find one i will send you a PM and you can have it just pay shipping.Thanks |
|
|
| jzz30tt |
quote:
Originally posted by FLICKER
you wouldn't happen to have a power steering pressure pipe that goes right into the pump would you?? need one and don't feel like shelling out over 500 bucks for a new one!
You should be able to go to a hydraulic hose place and have that hose rebuilt for less than 100. Just take it off and bring it to them. |
|
|
| xJoshx |
| Hey bud do you know where in Edmonton I could pick up the blue spark plugs? |
|
|
| Schramm |
| any party of the turbo kit or is it staying as a whole? |
|
|
| 90hatch |
| Yes I will part the kit out I was trying to sell as a whole but i see that is not working out so let me know what your interested in.The spark plug wires you can get at Napa,Canadian Tire etc I not sure what all parts stores are in Edmonton but most should carry NGK.Thanks |
|
|
| Schramm |
Ramhorn Manifold, 3bar MAP sensor, gauges/console ,and the MBC are what im interested in, and depending on my budget and your price the intercooler, p06 and maybe the 550cc's
is it too late to grab those hoses as well? |
|
|
| 90hatch |
Okay well the 3bar,injectors,PO6 and rad hoses have a sale pending will let you know if that goes through.The ramhorn,intercooler,MBC would be $530 shipped.The gauge pod thing has sold but all the gauges are still available.Thanks
My MSN and phone number are in the first post of this thread if you wish to contact me. |
|
|
| Schramm |
hmmm the waste gate placement on that manifold is straight forward aint it?
shit geuss i wont be using a full-rad if im gonna use that ramhorn. think you can throw in the rad for a total of $600?
and how much are you selling the turbo for |
|
|
| 90hatch |
Yes a full size rad would be tough i think.I will check tommorow what that is going to cost to ship first as this is going to be a big box and i dont want to end up getting burned.Thanks
Turbo is $425 shipped or $475 with stainless steel braid oil feed [-4] and -10 AN oil drain and comes with a new Vband downpipe flange. |
|
|
| 90hatch |
| $600 shipped for the rad,ramhorn and intercooler is fine shipping is not to bad.Thanks |
|
|
| 90hatch |
quote:
Originally posted by Schramm
you gonna through is some parts for the trouble? ;)
For the trouble:dunno: What is it you wanted im not following.Updated post with parts sold. |
|
|
| Cole |
| how much for the turbo kit i got cash:D |
|
|
| 95_ej2 |
| How much for rad hoses? |
|
|
| tokes |
| Just curious why you'd sell that stuff to make 600 WHP? Keep your current manifold, slap on a GT35R or a T3/T67 HO, a bigger intercooler, and it'll do 650+ WHP no problems. |
|
|
| 90hatch |
Rad hoses have sold.
I am going to a Holset HX40 and will be building a new top mount twin scroll manifold to take advantage of that feature of the Holsets.As well it will be getting a new back door intercooler,twin 38mm wastegates,3" charge piping and 4" downpipe and exh system so most of this stuff will not be needed.I plan on having everything built [esp motor] so it could easily be transferred to a full drag car if need be and be capable of more power at that point. |
|
|
|
|
