| Praylewd powr |
Quick question for the installers here:
I have a 03 Jeep liberty and went from the factory CD player to a new pioneer head unit. It is a brand new unit, and prior to it I installed two other pioneer head units. The radio wire in the dash has a female end so I need to run an extension to the head unit. All three head units have shitty FM radio reception, while the factory radio is 100% clean reception. Could this be a grounding issue, or the FM extension? I used the factory harness, including grounds, power wires, etc.
Any ideas, or anyone seen this before?
Duane |
|
|
| ron1 |
did you use an aftermarket wiring harness that plugs into the OEM harness or did you hard wire it in?
also check antenna connection
you might need to install a noise filter cause some times you get interference from other electical components in the vehicle
example: alternator. |
|
|
| Praylewd powr |
i used a wiring harness adapter, but soldered all the wires going into that.
thought it might be that, but I have never had an issue with those.
could it be that?
d |
|
|
|
