| Joe_299 |
Hey guys do any of you know the part number for the J-Spec Fascia, im thinking of getting it through Ericksen Nissan but they don't have the part number. Thanks!
Joe_299 |
|
|
| ~30oZ~ |
quote:
Originally posted by Joe_299
Hey guys do any of you know the part number for the J-Spec Fascia, im thinking of getting it through Ericksen Nissan but they don't have the part number. Thanks!
Joe_299
Check out Ztune.ca, the are located in Vancouver, so shipping is decent, Great bunch of dudes to do business with.:thumbup: |
|
|
| Joe_299 |
| how did you find the prices compared to the dealership once you include shipping? |
|
|
| Jdm300zx |
Forgot about ztune. Good call, especially being canadian. I just find dealerships ran pretty slow. If its not making them money, they don't care to much. These guys have had many z's in there shop putting on aftermarket fascia's and so forth. When i bought my datscan from z1 they phoned me to make sure my address was right. It didn't show up in some kind of data base. With companies that deal with aftermarket parts, Especially to z32's, they have done the job a million and one times and can direct you easily if you run into a problem. I doubt the dealership has put many 99' J Spec fascia's on. So just give there website a gander and email them. They got back to me pretty fast last time i email ztune.
Oh, as far as shipping, i would assume it would be pretty close to the same. Plus, you probably wont have to wait as long. Meaning, 99' Fascia on your z faster:D |
|
|
| Inzane |
I'll have to dig for the part #. I think I have it in my work email which I'll check tomorrow. Ericken's price was somewhere around ~$350 CDN, plus or minus a bit. (and another 10% off if you have a valid Edmonton Z Car Club member's discount).
I still recommend buying the fascia locally, and buying the rest of the accessory parts (corner lights, grill, etc.) from a Z parts vendor, such as CZP. The shipping on the fascia itself is nasty, but its not too bad on the rest of the parts. |
|
|
| Inzane |
quote:
Originally posted by Jdm300zx
I doubt the dealership has put many 99' J Spec fascia's on.
Irrelevant. The 99 jspec fascia goes on just like stock. Its oem-quality and fitment. BTW, fascia R&R is an easy DIY. (or I should say DIY w/ a buddy. It helps to have two pairs of hands).
quote:
Oh, as far as shipping, i would assume it would be pretty close to the same. Plus, you probably wont have to wait as long.
If you buy the fascia from the dealership, you won't pay any shipping, and if they have any in stock in the Edmonton warehouse you'll have it in a day or two. A week tops if it comes from Ontario. |
|
|
| Jdm300zx |
| Wow, duely noted. I wouldn't thought a dealership would touch that kind of stuff. Im actually impressed. When i worked at a dealership, they hated shit like that. If you can get it that cheap, giver. Thats a pretty sweet price. |
|
|
| Inzane |
quote:
Originally posted by Jdm300zx
Wow, duely noted. I wouldn't thought a dealership would touch that kind of stuff. Im actually impressed. When i worked at a dealership, they hated shit like that. If you can get it that cheap, giver. Thats a pretty sweet price.
Ericksen actually has a fairly club friendly parts department. But it helps if you get to know them too. They can bring in all kinds of oem and nismo parts on request. (but it helps them immensely if you do your homework ahead of time so they know what to look for - part #'s, etc.). |
|
|
| joker |
| I bought mine at Eriksens, price was as Inzane stated and I got it right away. Youll get raped on shipping otherwise as the box is HUGE. I plan on ordering all the other bits needed for it from the US though |
|
|
| vorpalz |
here's my part # from a few years back:
That was just for the fascia. You will need corner lights, J-spec intercooler ducts, grille mesh, lower retainer and foam support.
There may not be any left in the Nissan parts system in Canada, unless more have been ordered, they were getting pretty rare when I bought mine back in '04.
Try Z-tune as well, $ 550.00 for most of the above plus shipping.
Regards, |
|
|
| mike300zxt |
In stock at Ztune for $545 + GST (includes smoked markers and grill). FedEx from Vancouver to Edmonton is about $87 (oversized freight).
If you can pick up the fascia locally, you can save a tonne on shipping. The part # for the fascia is 62022-VP125.
The part # for the lights is 26120-VP126 ($42.41), and 26125-VP126 ($42.41). The grill is 62254-VP100 ($118.21). The foam spacer is 62094-VP100 ($50.41). Shipping for these from Van to Edmonton is $12 :)
Hopefully you can use those part numbers/prices to shop and compare! Nissan Canada usually has good stock of these popular items, although Nissan's prices have gone up about $36 since Rob got his (the current list price is $459). |
|
|
| Joe_299 |
| Thanks for the input guys, I'll take a look into it and let you know how it turns out. |
|
|
| ~30oZ~ |
Good luck with everything! Post pics after its done.
For the record, American Spec front bumper for the win!:p |
|
|
| MixManMash |
quote:
Originally posted by ~30oZ~
Good luck with everything! Post pics after its done.
For the record, American Spec front bumper for the win!:p
2nd. It's really not A-spec. It's what I would call original spec as JDM cars had the same front fascia for many years. |
|
|
| ~30oZ~ |
quote:
Originally posted by MixManMash
2nd. It's really not A-spec. It's what I would call original spec as JDM cars had the same front fascia for many years.
True lol. :) |
|
|
|
