| 2ndgenlude |
selling my 95 EG Hatch
good project car, but the body needs work. it has the famous tremclad paint job, and its not done well at all. currently painted yellow. i would suggest to spray bomb it black or something. anyways, odo says 230k at the moment. engine probably around 80k.
Good
-5spd
-New JDM ZC VTEC SOHC engine (same as d16z6, and I still have the receipt from JDM Source)
-Tranny shifts Smooth, no grinds, clutch had lots left on it. (CX Tranny is installed)
-JVC deck,Infinity rear 6x9's,RCA's in the doors
-Ractiveshort ram intake
-Aftermarket muffler (unknown)
-newer nordic winter tires on all 4 corners
"HID Look" headlight bulbs
- New rear upper control arms
-rust free for the most part
-new horn
-have clean carfax report
The Bad
Needs out of province inspection, and there is a small rust hole in the drivers side floorboard preventing it from passing. It will pass safety for insurance no problem, but the hole will have to be fixed to get it to pass OOP. Passenger side mirror is cracked, hatch door release doesn't work (snapped cable), bumpers are cracked, cluster kicks out sometimes, if you kick the fusebox it comes back on :confused: probably a loose wire. also drivers side door inside lock switch is broken. needs a new fuel door too.
***EDIT*** it has developed a exhaust leak between the downpipe and cat. pretty sure its just the donut gasket
Extra parts
i made a junkyard trip a few days ago and got the following stuff for it:
new rust free hatch door with new release cable
rear hatch glass
OEM spoiler with 3rd brake light
DC2 integra LS cluster with tach (fits with modification)
overall it gets around town great, awesome on gas and is pretty quick for what it is. would make a sweet project car. i just don't have the space/ time for it.
Im asking $1200 firm
price reflects work needed.
I don't think I left anything out. if i think of something i will edit this. will have pictures up tonight. |
|
|
| 2ndgenlude |
| alright, i will take offers. just don't insult me please. |
|
|
| mattEG |
| How rust free is "rust free"? A hole in the floor likely means the rockers are toast, can you elaborate? |
|
|
| 2ndgenlude |
| no visible rust on the body besides the hatch door, but a new door comes with it. . rockers are probably rusty. havn't taken a good look under it. going by what the mechanic said. |
|
|
| mike3 |
| What province is it from? What happens with the cluster? Has it been in any accidents? Did you do the swap yourself? |
|
|
| 2ndgenlude |
| last place it was registered in was new brunswick i think. the carfax is at work. cody (ayeso) and me did the swap. cluster just dies randomly. as soon as you kick the dash a few times it comes back on. its weird. im guessing loose connection possibly by the fuse box. as for accidents none that i know of. it kinda looks like it was bumped in the rear though. bumper doesn't line up, could just be poor fitment. previous owner didn't tell me anything. carfax is clean. |
|
|
| mike3 |
| Like everything on the cluster stops?? just the speedo? the lights? |
|
|
| 2ndgenlude |
| speedo and turn signals won't workas well as temp gauge. but fuel gauge still works when it goes out. |
|
|
| mike3 |
| hmmm. How often does that happen? |
|
|
| 2ndgenlude |
| i drove to saskatoon with it and it happened once on the hwy. but it happens every 10-15mins around town. im guessing my foot bumps a wire under the dash perhaps when i go for the clutch. ive noticed it happens the most when im stopped with the signal on though. |
|
|
| 2ndgenlude |
| bump. will take $1800 firm |
|
|
| 2ndgenlude |
| need this thing gone. new car is a few days away. 1st decent offer takes it. the engine alone is worth 600 without a trans. |
|
|
| 2ndgenlude |
| bump, throw me a offer. |
|
|
| mike3 |
| Did you get my PM asking for pics? |
|
|
| mike3 |
| Did you get my PM asking for pics? |
|
|
| 2ndgenlude |
| ya i just forgot lol. i just emailed a few. i will get some more recent ones/ pic of the floor this weekend. |
|
|
| 2ndgenlude |
bump. $1400.
i'll upload a picture of the floor tonight and the rockers. |
|
|
| 2ndgenlude |
hole is around 2x2 inches give or take.
rest of the floor seems fine.
rockers are not bad at all, little rusty but average for the year.
the hole would probably require cutting out and welding a new piece in to do properly. not a hard job if you can weld. then again i know nothing about welding lol. |
|
|
| 2ndgenlude |
| might be willing to part out if there is enough intrest. or i will trade for something like a SLR camera, or something like a pioneer avic nav unit. or 17"-18" rims 5x114.3 |
|
|
| Ajaxs |
| willing to trade for 1989 Nissan pathfinder? |
|
|
| 2ndgenlude |
| sorry no. i need my spot on the driveway back lol. someone throw me a offer. |
|
|
| kwan |
| hey will you part out??? if so then i will grab some stuf from you |
|
|
| 2ndgenlude |
| 1200 for car as it sits. i cannot go any lower. i need this gone asap. |
|
|
| 2ndgenlude |
| just a heads up, if its not gone by next friday it will be sent off to either the auction, or scrap. ive had enough of it sitting on my driveway :P |
|
|
| mattEG |
quote:
Originally posted by 2ndgenlude
just a heads up, if its not gone by next friday it will be sent off to either the auction, or scrap. ive had enough of it sitting on my driveway :P
I'll haul it away for free! :P |
|
|
| mike3 |
| I thought you were parting it out??? |
|
|
| 2ndgenlude |
| lots of interested people, just noone to come and get anything. worst comes to worst, i will just pull the engine and sell it, pull a few good parts off and crush the rest. tire just decided to go flat on me too. |
|
|
|
