| Focus Guy |
As some of you have recived messages about them we have 3? ready to drop SR20 engine pkgs rangeing from 3900-4200. No clips are avalable at this time but they have most everything needed. '
steve |
|
|
| 1mns13 |
| Can they be viewed? At least to be positively identified? |
|
|
| Focus Guy |
quote:
Originally posted by 1mns13@Jul 20 2003, 01:37 PM
Can they be viewed? At least to be positively identified?
You can not visit the storage site but if you let me know what you need to know or see we can provide video or simply the info. |
|
|
| captain nismo |
| What all is included in these packages? |
|
|
| 1mns13 |
| Video of all components will do. That will answer the questions. AFM, ignitor chip, CAS, turbo extension, compressor intake, ignitor cover complete uncut harness, proper ECU, red top should have BIG 62 on it. any stock i/c or piping? |
|
|
| Inzane |
quote:
Originally posted by MIDAS GUY@Jul 20 2003, 06:38 PM
You can not visit the storage site but if you let me know what you need to know
"We got no engines, do we? DO WE?? A couple SR20's would pull a premium a week before Race Wars, wouldn't they?"...
...
"Where's my engines?"
...
"Glllllhhhhhhhhhaa... the Warehouse!.... THE WAREHOUSE!!!!"
:P :D |
|
|
| JdmCrx |
quote:
Originally posted by Inzane@Jul 20 2003, 08:30 PM
quote:
Originally posted by MIDAS GUY@Jul 20 2003, 06:38 PM
You can not visit the storage site but if you let me know what you need to know
"We got no engines, do we? DO WE?? A couple SR20's would pull a premium a week before Race Wars, wouldn't they?"...
...
"Where's my engines?"
...
"Glllllhhhhhhhhhaa... the Warehouse!.... THE WAREHOUSE!!!!"
:P :D
:bow: :lol: :lol: :lol: <_< :hitit: |
|
|
| ereid |
| i bought a full front clip from an s13 for 3900 are you selling just the engine for 3900????? |
|
|
| captain nismo |
quote:
Originally posted by ereid@Jul 22 2003, 12:56 AM
i bought a full front clip from an s13 for 3900 are you selling just the engine for 3900?????
Yeah I know, the prices look kinda step. Where did you get your s13 clip from? I'm looking at swapping soon and info would be much appreciated ;) |
|
|
| Focus Guy |
I did some checking and you nissan guys are right the pricing is high, the honda supplier (same guy) has realy good honda pricing but shity mitsu and nissan prices I aslo am not totaly familar with nissans yet. I checked with one of our higher priced honda swaper that has good pricing on sr20det swap packages (all you need) for about 2900.00.
If any of you still have interest send me a list of REQUIRED parts to due this swap and I will look into what this package includes.
However being base far away a shipping cost of 300/swap would be billed to you totaling 3200.00 for your swap
steve |
|
|
| Tsunami |
| so you will do the swap for $3200? Or $3200 for the engine set then the install? If so, how much do you charge for install and what kind of warranty do you give on these engines? |
|
|
| Focus Guy |
quote:
Originally posted by Tsunami@Jul 22 2003, 05:24 PM
so you will do the swap for $3200? Or $3200 for the engine set then the install? If so, how much do you charge for install and what kind of warranty do you give on these engines?
The parts are 3200 swaping the engine would be extra.
The engine have a start up garrentee, that states it will not smoke or make CRAZY
:wacko: sounds upon start up. If by some chance they did action would be taken I have not yet proformed a SR20 swap yet as nissans are new to me.
From talking to freinds of mine that do swaps on a regular basis they compare a SR20 to a Honda ZC which is a cake walk. If there is some one wanting to do a nissan swap I will gladly consider a first time install discounted install.
steve |
|
|
| sil_eighty |
:blink: ooo nooo......
i wouldn't let u touch my car.....if u want to seriously sell sr20det's then u better do some serious reading......and get firmilar.....the motor drops right in its the wiring harness, ecu, and ignitor chip that u should be carefull with......
a uncut harness is no way to start off installing...you'll end up with some serious nightmares! :o |
|
|
| Tsunami |
| PE Tuning has done sr swaps... the one I seen runs super smooth, like a swiss watch. But then again, they did a couple weeks worth of research before even taking on that kind of project. |
|
|
| sil_eighty |
the only one that i know runs smooth and it was a home job...
1mns13..... :bigthumbup: :bigthumbup: :bigthumbup: |
|
|
| choweyt3t4 |
[QUOTE=MIDAS GUY,Jul 22 2003, 05:39 PM] [QUOTE=Tsunami,Jul 22 2003, 05:24 PM]
From talking to freinds of mine that do swaps on a regular basis they compare a SR20 to a Honda ZC which is a cake walk. If there is some one wanting to do a nissan swap I will gladly consider a first time install discounted install.
steve [/QUOTE]
this swap is far from a cake walk, i helped my buddy do a few of them and its not a easy thing like a zc. wiring is a big nightmare etc. if you guys need someone to do installs talk to nyguen at Autodream in calgary, he is a pioneer for sr20det swaps and has a lot of experience doing them. he averages about 3 to 4 swaps a month so he knows what he is doing |
|
|
| 1mns13 |
| The swap is a cake walk. Sumaru's has done two swaps. How many has PE done? My friend and me did mine. It is an easy thing like a ZC. And there are no SR20DET pioneers in Alberta. Just the facts mam. If Midas can do a ZC they can do and proper generation SR20 into proper generation S-chassis. Improper swaps can take a little more time or money, one or the other. |
|
|
| Focus Guy |
quote:
Originally posted by 1mns13@Jul 24 2003, 03:25 PM
The swap is a cake walk. Sumaru's has done two swaps. How many has PE done? My friend and me did mine. It is an easy thing like a ZC. And there are no SR20DET pioneers in Alberta. Just the facts mam. If Midas can do a ZC they can do and proper generation SR20 into proper generation S-chassis. Improper swaps can take a little more time or money, one or the other.
Thanks! being you have done your own when you have a free monment could you make a proper list of all the items need to swap this, and the common stuff forgoten. |
|
|
| 98Luder |
Yea...
Nyguen is a cool guy, met him once for wings. Hey Chowey what's up :)
His S14 is pretty dope and i have to say he is one of the first ppl i've seen with the SR20 in the car. I had no idea Autodream was his, cool cool :)
The install is not too bad, dont' worry Steve....it's quite easy and basic
As for us doing SR20 swaps? heh, what's an SR2twenty? Is that the new Star Trek series? |
|
|
| Inzane |
quote:
Originally posted by 98Luder@Jul 24 2003, 11:00 PM
As for us doing SR20 swaps? heh, what's an SR2twenty?
You know... Its what rich Koreans swap into their Hondas to make them go faster! ;) :D At least, in the movies they do. :P |
|
|
| sil_eighty |
a hahahaa... ya that was fun......
"we need those sr20's this weekend" -jonny
ya we sr20det guys arent gunna give u a list for the swap unless were getting somthing out of it, and id never take my car to ricer maidus in shambbles town....
.....so u pay sum one for the info and tricks...or go research it yourself... |
|
|
| SlowAzzPorsche911T |
quote:
Originally posted by captain nismo@Jul 22 2003, 08:19 AM
quote:
Originally posted by ereid@Jul 22 2003, 12:56 AM
i bought a full front clip from an s13 for 3900 are you selling just the engine for 3900?????
Yeah I know, the prices look kinda step. Where did you get your s13 clip from? I'm looking at swapping soon and info would be much appreciated ;)
you're bitching about 3900 for a hi-performance engine? :unsure: try paying 9 grand for a Porsche 3.0L with about the same performance :rolleyes: |
|
|
|
