| ef tranny - Click HERE for Original Thread |
| megabyte |
| I would like to know what motors will bolt up to an ef tranny? Hope some one can help me out. |
|
|
| THUD |
Well pretty much any D series tranny will bolt up to and D series motor.
So it you got a d15b7(EG) it should bolt up to tranny off a D15b2(EF) 88-91 any d15 or d16 will do, a buddy swaped a EG tranny into a 97 civic no problem :beer: |
|
|
| b18b.eg |
arent ef transmissions cable? not hydro?
if you have an ef you can put any d series you want pretty much into it.
if you want to reuse your ef tranny in a eg or ek DONT waste your time (this is only applicable, if i ef trannys are cable). |
|
|
| Stainless |
| I wish I could help you ef a tranny, but I don't have any idea where you could find a tranny around these parts, let alone want to help you ef one. All the luck to you though. Make sure you use lots of lube during the assembly process though. |
|
|
| megabyte |
| i dont need a tranny i just want to know if a b series motor will bolt up to a d series motor. |
|
|
| b18b.eg |
ok.
1. you should of stated that in your first post
2. NO! |
|
|
| AudiInProgress |
quote:
Originally posted by b18b.eg
ok.
1. you should of stated that in your first post
2. NO!
have
should have
not "should of"
"Should've" is a conjuction of should + have... When spoken aloud, I can see where the common misconception of "should of" comes from... But it's incorrect. |
|
|
| Ayeso |
If EF=D & B != D Then
wscript.echo "D series will not fit on a B series"
end if
wscript.quit |
|
|
| Invalid Zero |
quote:
Originally posted by megabyte
i dont need a tranny i just want to know if a b series motor will bolt up to a d series motor.
Are you trying to create an inline-8? |
|
|
| Ayeso |
quote:
Originally posted by Invalid Zero
Are you trying to create an inline-8?
haha i never noticed how he worded it thats funny.
Here is a few of the engines a D series EF tranny will bolt up to.
+ 3.3.1 D15A2
+ 3.3.2 D15A3
+ 3.3.3 D15B
+ 3.3.4 D15B (D15Z7) (with 3 stage VTEC)
+ 3.3.5 D15B1
+ 3.3.6 D15B2
+ 3.3.7 D15B3
+ 3.3.8 D15B4
+ 3.3.9 D15B6
+ 3.3.10 D15B7
+ 3.3.11 D15B8
+ 3.3.12 D15Z1
+ 3.3.13 D15Z4
+ 3.3.14 D15Z6
+ 3.3.15 D15Z8
o 3.4 D16 Series Engines (1.6 Liters)
+ 3.4.1 D16A1
+ 3.4.2 D16A3
+ 3.4.3 D16A6
+ 3.4.4 D16A7
+ 3.4.5 D16A8
+ 3.4.6 D16A9
+ 3.4.7 D16W7
+ 3.4.8 D16Y3
+ 3.4.9 D16Y5
+ 3.4.10 D16Y7
+ 3.4.11 D16Y8
+ 3.4.12 D16Y9
+ 3.4.13 D16Z5
+ 3.4.14 D16Z6
+ 3.4.15 D16Z9
* 4 ZC(similar to D15Z4, D16Z6, D16A1, D16A3, D16A6, D16A8, D16A9 and D16Z5 engines) |
|
|
| megabyte |
| Thanks Ayeso. And where did that other guy get the idea that some shmuk would try and make an in line 8. |
|
|
| Ayeso |
quote:
Originally posted by megabyte
Thanks Ayeso. And where did that other guy get the idea that some shmuk would try and make an in line 8.
probably because you said..
"i dont need a tranny i just want to know if a b series motor will bolt up to a d series motor."
Motor will bolt up to motor |
|
|
| EK9Hatch |
quote:
Originally posted by Invalid Zero
Are you trying to create an inline-8?
Thats what I was thinking. But why use a D-series and a B-Series? Why not just bolt 2 B-Series motors together? :dunno:
Jamie |
|
|
| megabyte |
| It was a typ- O. you guys know what i meant. |
|
|
|
|
|
