| Jayturbo |
Link too pics and build
http://forums.780tuners.com/showthr...;threadid=78722
Hopefully the pics tell the story more than my lack of time to describe the car.
More or less stock body, tien springs with OEM sir struts, no aftermarket rear lca's and subframe brace is ractive or some other junk brand, also comes with front lower h or x brace not sure on manufacturer and not installed on car. I have all the ac parts and lines for the engine bay minus one, and none of the ac stuff is installed firewall forward, but its only like an hour long job to throw the lines on. PS pulley is off right now because I dont like PS on honda, I have the stealthmode performance ps delete kit and wilwood bmc resevoir remote mount kit for the resevoir for the ps.
Other parts not installed are the new brembo cadium plated rotors, pbr ceramic low dust pads, earls ss brake lines, comes with stock mirrors and jdm ctr mirrors are installed, comes with extra set of ITR wheels in white with about 50% rubber and some curbage, and a set of buddy club p1's in white with bad rubber and no curbage. Interior is very mint now and all put back together, i replacedf a lot of parts brand new form honda and ctr shift boot and dk grey sk2 knob, stock steering wheel included. Mint teg leather front and rear, apline mp3 ipod cd player etc...
Issues!
-Car has a broken wheel stud
-Ac is not installed, if thats an issue
-Body is in ok shape car sat for a long time and collected some dents, no rust at all, very clean underneath, vis hood doesnt fit the best... kinda typical and came out of the box with 2 spider cracks.
-hood latch acts up from time to time, but i think it's the release cable.
-No false floor in trunk or spare tire for 5 lug
Everthing else pictured is included as well as lots more parts i'm forgetting about like spare alt. spoon rad cap, misc interior bits etc.
I was gonna keep this car as my daily, but will be moving shortly and cant take it with me.
Drives great, lots of power, motor is jdm 01 itr engine t1r test pipe, apexi ws2 exhaust, itr airbox but aem intake is included as well. running obd1 p28 with stock jdm itr basemap
I'm gonna ask 11k obo
Pretty much have to sell it, so I am very open to offers.
I am willing to drop the price a bit if the works arnt included in the sale.
NEW PRICE IS 9000$ OBO no works or buddy club p1's included in sale. White integra type r wheels will be included with two new tires and two 50% tires. |
|
|
| the_fornicator |
Jesus christ. great job on the build, mate!
I could use a 2nd sir. hmmmmmmmmm. |
|
|
| Jayturbo |
Bump!! Why isnt this car getting any attention? Lack of interior pics? Lack of other pics? Too high of price? Honda's are just too played out?
Help me out here people. |
|
|
| kayin |
probably a bit of everything lack of money, nissans are the "cool" thing now, honda's don't have enough hp # for kids to brag about...great job on making that car respectable again
are you desperate enough to take 5k for the car? har har, just kidding..good luck with selling it |
|
|
| Refresh |
| List it on beyond. There is a way bigger Honda scene in calgary |
|
|
| Jayturbo |
I dont have an account lol : (
Car also comes with new MTEC HID's 8K Just did an oil change, and replaced dr. side mount cause the urethane was cracked.
Also the pics do not show the apexi WS2 exhaust thats the old 3'' turbo back.
Hood pins were also just installed for fear of the hood flying off, Im not a big fan but I've seen too many of these hoods fly open so it had to be done : ( they're are the flush style ones not the "hey look at me" ones. |
|
|
| RobTurbo |
| can you throw in vtech for that price? :dunno: |
|
|
| Jayturbo |
Common people...
It's got mad VTAK yo |
|
|
| Spoonin |
| bump for a sweet honduhhhhhhhhhhhh |
|
|
| Jayturbo |
Really need to sell this car.
In two weeks if it isn't gone it's going into storage for a very long time : ( |
|
|
| Jayturbo |
PRICE DROP
9000$ OBO with stock type R wheels and 2 new tires and two 50% tires.
Works up seperately for 1400$ But more than likely sold already and buddy clubs are sold.
Needs to go |
|
|
| Refresh |
| Let me know if you are willing to part any stuff - mainly the 5 lug/wheels for 4lug/wheels+cash |
|
|
| Jayturbo |
| If you buy the car, you can have the 5 lug and wheels for free. |
|
|
| Refresh |
| Haha - nice.... Anyways good luck on the sale. I would buy it but am a little broke. |
|
|
| Jayturbo |
So far I have received virtually no interest in this car.
I'll just throw this out there... 8500$ with everything I have related to Hondas, itr wheels and work wheels, no buddy clubs as they are sold.
8500 dollars for a sir with JDM b18CR, 5 lug, work wheels, mint leather, and a giant pile of other parts.....
I really really need to sell this so I can move.
There is a massive pile of parts that can go with the car, like aem intake, itr strut tower bar, new brembo caduim plated rotors, pbr pads, stainless lines, extra chipped p28, momo steering wheel (no hub), gauges, apexi vafc, apexi rsm, a pillar with gauge pod, cluster bezel with gauge pod, etc. There is tons of stuff I am forgetting.
Car also comes with free rabbit brains on the front bumper! |
|
|
| Jayturbo |
| Unless it's located in BC i doubt it lol |
|
|
| Refresh |
| hey jason - pm me your digits |
|
|
| Jayturbo |
I throw in some free rabbit brains and the pm's start to flood in...
weird. |
|
|
| RobTurbo |
| maybe throw in a free BJ and it`ll sell faster:dunno: |
|
|
| Jayturbo |
Maybe it's sold bitches!!!
On a side note... fuck everyone who didn't buy the car, fuck everyone on this forum.. and fuck everyone in edmonton :D |
|
|
|
