780Tuners Edmonton Car Forums
780Tuners Edmonton Car Forums Edmonton Car Forums > 780Tuners Edmonton Car Forums Archive > Edmonton and Area Car Forums > Club Zone- Visit here for several local clubs in Alberta > Edmonton Prelude Club

 
may 23rd - Click HERE for Original Thread

2ndgenlude
anyone want to meet? weather should be nice. I will have my lude out. as long as i can get my sway bar in today/ tomorrow.

Prudz_lude
possibly, i am going to see if my gf is down.

whitespike22
yeah might be out if i get my lude back in time check out wat happened to it in the new thread i posted....

NathanRed
maybe its my birthday so we'll see haha

Prudz_lude
ohh shit, i thought that was saturday. Nvm, going to Nathans party :thumbup:

NathanRed
lol all good man the part is saturday, but brianne is doing something for me friday

Prudz_lude
quote:
Originally posted by NathanRed
lol all good man the part is saturday, but brianne is doing something for me friday


OHHHHH i see, in that case, i will most likely be out on friday.

NathanRed
hahaha

walkur1
I'm game, good weather or not. We should get food somewhere. What time?

NathanRed
kurtis do you want that headlight???

Nis13
quote:
Originally posted by NathanRed
maybe its my birthday so we'll see haha


wow... my birthday too.. my friends today and my friends on the 24th and i know another person on the 21st and 25th

NathanRed
fuck thats crazy i know 3 other peoples who bday is tomorrow also

2ndgenlude
i know 1 on sat lol. as for food, maybe chiles or something. or we could cruise to west ed and hit bourban street.

whitespike22
..doesnt look like im going to make it FFS!

walkur1
Yes I want that headlight... I can pick it up tomorrow, if you will be around. I need to know where you want to meet or where you live. I am done work at 5. Let me know.

And depending on what time the meet is at, I might not make it... maybe I'll just go to UC if I am free by then.

NathanRed
call me tomorrow i am off at 230

Beagles
yeah its my friends 18th so im out for tomorrow

2ndgenlude
got the swaybar in. went around the block and it definately feels better. adam- my old endlinks didn't have the rubber bushings on them lol. they were just sitting in the hole wiggling around.
so bad....
started to idle weird though after i got home from going around the block. idles steady but a/f gauge showed it seriously lean. might just hook the laptop up tomorrow and bump the idle a bit. idles with perfect air fuel around 1800rpm. when i started it cold though it idles like a dream. maybe a charge pipe or something came loose. anyways i should be out tomorrow if a few of you want to show up.

Prudz_lude
check my prelude power thread. I just did 6 hours of work. I am coming out lol.

walkur1
What time are you guys meeting at? And where? Let me know what the final plan is, so that when I am free I can join up.

2ndgenlude
9pm air museum, then no idea lol. i don't think i will be out all that long. be a good shakedown on the car though. if something is going to go wrong it will prob happen tonight. after all ive been through with it whenever i drive it i think something is going to break :)

might cruise down to uc. then who knows. it is track night though so everyone will be heading to the track. uc won't pick up until 10-1030.

Prudz_lude
that and DTP calgary is happening. I might stay out and stay all night at uc afterwards, odds are i just go home after our meet since i don't feel like bagging my car right now...but who knows, that may change later today.

I am running water as my coolant. I want to see how well it actually works. Apparently really well and i can run it until august.

2ndgenlude
be careful running water too long. starts to corrode your block/ not lube the water pump properly. use distilled too. just buy some clamps and use coolant lol

whitespike22
getting my car back today...probably will show up....still need to put those HIDs in...lol hint hint

Prudz_lude
quote:
Originally posted by 2ndgenlude
be careful running water too long. starts to corrode your block/ not lube the water pump properly. use distilled too. just buy some clamps and use coolant lol
Really? hmmm looks like i am going to ctire to buy some coolant after work. I needed to put something in the car for my drive to work. I was unaware that it corrodes the block.

Prudz_lude
same. I did not have time to do my hid's last night. Maybe we should all meet up at like 7 and do some hid installs :thumbup:

2ndgenlude
ya coolant has a corrosion/rust inhibitor and acts as a lubricant for the water pump. you can run water but you need to put some other additives in it. and use distilled water since it leaves no deposits.

2ndgenlude
meet at my place at 7 we could do hid installs. im kinda far though, especially for whitespike lol. we could do them in the air museum parking lot i suppose. just need a drill, some self tapping screws, or zip ties for the ballasts.

Prudz_lude
i suppose. i am not going to drill the ballast in place. I just want to zip tie them for the day. I am going to tuck the ballast in the fenders and gut the a/c this weekend. Along with a battery relocation. I am just not 100% sure how to hook everything up. I just need to see an installed set and i will be good. Still, hid's tonight would be chilling.

tcpx
I might be able to show up; might have to leave around 9:30 - 10:00 though since I gotta go somewhere after

I'd be down for a group HID install though, mine's still just sitting in the garage :D

2ndgenlude
quote:
Originally posted by Prudz_lude
i suppose. i am not going to drill the ballast in place. I just want to zip tie them for the day. I am going to tuck the ballast in the fenders and gut the a/c this weekend. Along with a battery relocation. I am just not 100% sure how to hook everything up. I just need to see an installed set and i will be good. Still, hid's tonight would be chilling.


thats how i installed them in the civic. can't even tell i have hid's from looking at the bay. ballasts are zip tied up in the fender. looks clean. my prelude is ghetto install though. funny cause garage works installed them. i will be working on my car in the driveway till prob 8 or so detailing and working on my front end. anyone is welcome to come by. pm me for my address.

tcpx
so are we all meeting at the air museum or tyler's house?
gonna be my first meet haha.. is there some kind of initiation involved or something :lol:

2ndgenlude
i can't really meet anywhere besides my house lol. need to get my bumper on properly so it doesn't fall off during the cruise haha. would be most embarrasing. im far north end though. 180ave. unless you guys want to meet somewhere else and i could meet up with you at the air museum.

tcpx
holy shit isnt that outside the city lol
anywhere's fine I suppose, whatever the general consensus is

walkur1
quote:
Originally posted by tcpx
so are we all meeting at the air museum or tyler's house?
gonna be my first meet haha.. is there some kind of initiation involved or something :lol:



No, nothing like that... although my first meet was Tyler, Jason (I think) and my buddy... only two ludes showed. It was awesome.

Adam, I'll give you a call to find out where you guys are and meet up...

2ndgenlude
quote:
Originally posted by tcpx
holy shit isnt that outside the city lol
anywhere's fine I suppose, whatever the general consensus is



lol, if you look over the fence in back yard you see the welcome to edmonton sign a little up the hwy.

Prudz_lude
sounds good. i think i am going to head to tylers house. If you and john want to join me on the cruise to tylers be at my house at about 6:45 7 at latest.

Also we paddle new comers. :thumbup:

NathanRed
lol oh adam with homosexual innuendo's ohhhh gin and tonic

Prudz_lude
lol wtf, i was thinking dazed and confused actually. But if that is what you want nathan....i suggest you look else where :lol: Also, it was already proven that more people think it is a mans drink than a womans drink.

NathanRed
haha im just bugging u, maybe i will try this drink tomorrow haha

Prudz_lude
count me out, my car took a dump on me and i am clueless to why. Check my pp thread to find out whats up.

2ndgenlude
ya, sounded weird. i still think its the battery, or cables/connection somewhere. i guess its just me/maybe ryan/ tcpx/walkur later maybe.

whitespike22
ill be over and yeah just got my stero system in too todyay probably gonna install it tommorow....

walkur1
I replied in your pp thread... In my experience with clicking starters, it was corroded/poor connections with my terminals (+ in particular).




Do you want to post a reply? This is the 780tuners.com archive, to participate in daily discussions on cars, visit our forums website and register today! Its free.

< Contact Us - 780Tuners Edmonton Car Forums - Advertising Info - Archive >

Powered by: vBulletin Version 2.3.9
Hosted by: Beyond Car Forums
Sponsored by: Replicon's Web TimeSheet - timesheet software
for time tracking Copyright ©2000 - 2008, Jelsoft Enterprises Limited.