780Tuners Edmonton Car Forums
780Tuners Edmonton Car Forums Edmonton Car Forums > 780Tuners Edmonton Car Forums Archive > Edmonton and Area Car Forums > Performance, Show and Sound Tech

 
Dsm Problem - Click HERE for Original Thread

nismo_silvia
The following problem is on a 91 Talon TSi Fwd

I just had my motor rebuilt and now the car will not start.

I had the motor rebuilt and everything was fine, we put the old battery in that sat on the ground for about 5months. The car would not start without boosting the battery, so the mechanic took the car for a drive with the booster pack on and it drove fine. The car drove perfectly normal for 2-3 minutes then all of the sudden the car just died.
The mechanic says that he has changed the flowing parts:
Ignition coil, Ecu, Ecu relay, coolant temp sensor, maf-t, new battery, also said that the alternator is fine. So, till this day when we try starting the car it seems like it wants to start but will not completely go over. What do you think could be wrong or needs to be changed any ideas will work thanks!

Psi
Test your Cam Angle Sensor.

nismo_silvia
quote:
Originally posted by Psi
Test your Cam Angle Sensor.

how do i check that?

Invalid Zero
How about a fresh battery? :dunno:

nismo_silvia
thats what i did it says there

i bought brand new battery the next day

Psi
quote:
Originally posted by nismo_silvia
how do i check that?


Haynes manual walks you through it im pretty sure.

Check- do you have fuel pressure
do you have spark at your plugs

Eclipser
vfaq has a write up. Check your coill pack, fuel pump, power transisitor, cam angle sensor, crank angle sensor. There are write up's on vfaq on how to do all of them.

nismo_silvia
dose anyone have a cam angle sensor, crank angle sensor that i can borrow to try in my car to see if thats the problem that would be wicked if u do thanks

Eclipser
You can test them without another working sensor. It takes about 10 minutes each.

nismo_silvia
so i am geting fuel spark and i changed the cam agngle sensor and i still have nothing the bitch wants to start buy just wont fucking go.. anyone got any other ideas???

Psi
Do you have spark on all 4 cylinders. Or did you only test one.

nismo_silvia
I sure did check all 4

Eclipser
quote:
Originally posted by nismo_silvia
so i am geting fuel spark and i changed the cam agngle sensor and i still have nothing the bitch wants to start buy just wont fucking go.. anyone got any other ideas???


Did you test everything I said? I tested all of them in my car in 20 minutes or less. Go do it now, and report back

nismo_silvia
quote:
Originally posted by Eclipser
Did you test everything I said? I tested all of them in my car in 20 minutes or less. Go do it now, and report back


i did check everything and the bitch still wont gooooo

Psi
Do you have fuel pressure?
I think the way to test that is take off the fuel return after your FPR and see if it spurts fuel while cranking.




Do you want to post a reply? This is the 780tuners.com archive, to participate in daily discussions on cars, visit our forums website and register today! Its free.

< Contact Us - 780Tuners Edmonton Car Forums - Advertising Info - Archive >

Powered by: vBulletin Version 2.3.9
Hosted by: Beyond Car Forums
Sponsored by: Replicon's Web TimeSheet - timesheet software
for time tracking Copyright ©2000 - 2008, Jelsoft Enterprises Limited.